4233-9 Pomona Electronics, 4233-9 Datasheet - Page 2

• Manufacturer Part Number: 4233-9
• Description: MICROGRABBER D-I-Y 10/PKG WHITE
• Manufacturer: Pomona Electronics
• Series: 4233r
• Type: Micrograbber®r

Specifications of 4233-9

• Color: White
• Hook Type: Hook
• Hook, Pincer Opening: 0.060" (1.52mm)
• Length: 1.710" (43.43mm)
• Termination: Solder, 0.090" (2.29mm) Wire Opening
• Equipment Type: Test Clip Kits
• Current Rating: 3A
• Overall Length: 43.43mm
• Connector Type: Test Clip
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 6625011130862

Pomona
FIGURE #1
A. Remove the cap from housing assembly, the
B. Insert the wire into the cap assembly allowing
C. Strip wire 1/8 to 3/16 inches.
D. Insert exposed conductor through the hole in the
FIGURE #2
E.
FIGURE #3
F.
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies. Made in USA
6/9/99
SY/EH/LS
S:\Engineering \Release\DataSheets\FlukeDataSheet\d_AI_4233_5524_2_01.doc
contact will now be exposed.
approximately 1 to 2 inches of wire to extend
beyond the cap.
contact and solder to surface.
Important: Solder must not extend beyond the
indicated width.
Install the cap onto the housing assembly. Align
the contact with the slots located on the cap.
Sales: 800-490-2361 Fax: [phone]
Technical Assistance: 800-241-2060
®
Model 4233 & 5524 with Assembly Instructions
Do-It-Yourself Micrograbber®
& Test Clip Kits
PomonaACCESS 90592 [phone] or [phone]
More drawings available at www.pomonaelectronics.com
Page 2 of 2