1241.3003 Schurter Inc, 1241.3003 Datasheet - Page 3

• Manufacturer Part Number: 1241.3003
• Description: SWITCH PIEZO AL NAT M16 NO QC
• Manufacturer: Schurter Inc
• Series: PSEr
• Type: Piezor

Specifications of 1241.3003

• Circuit: SPST-NO
• Switch Function: Off-Mom
• Contact Rating @ Voltage: 0.1A @ 42VAC/DC
• Actuator Type: Flush Round Button
• Mounting Type: Panel Mount
• Termination Style: Quick Connect - .250" (6.3mm)
• Application: Used in hostile environment
• Color: Alu. Natural
• Contact Form: 1 NO
• Current, Rating: 100 mA
• Ip Rating: IP67
• Mounting Hole Size: 16 mm
• Operation: Piezo
• Special Features: No moving parts
• Standards: CE Certified
• Temperature Rating: -40 to +85 °C °C
• Termination: Quick Connect
• Voltage, Rating: 100 mA @ 60 VDC VDC
• Contact Configuration: SPST-NO
• Operating Force: 3N
• Contact Voltage Ac Max: 42V
• Contact Voltage Dc Max: 60V
• Contact Current Max: 100mA
• Actuator / Cap Color: Natural
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Illumination Type, Color: -
• Illumination Voltage (nominal): -
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: 16ANAF-00000000-NO-F; 486-1543

SCHURTER GmbH
D – 79346 Endingen
www.schurter.com
1
The piezo switch is based on the functional principle of the piezoelectric crystal. The action of force
During the voltage drop, the electronic switch contact is closed for the specified pulse duration.
Diagram of an NO switch:
The piezo disk is connected to the terminals 1 and 2. The electric circuit to be switched is
In the neutral position of the piezo switching element, the terminals 3 and 4 are non-conductive,
When actuating the piezo disk, the resistance between terminals 3 and 4 is therefore changed from
This corresponds in principle to the function of a conventional NO pushbutton switch.
on the piezo disk causes a voltage to be induced due to a charge transfer. The voltage generated
is converted by the electronic connection into a polarity-neutral, electronic switch contact.
After this, the electronic switch contact opens again, even if the force is still present. The period
that the electronic switch contact remains closed depends on the actuating speed and force as well
as on the duration of actuation.
connected at the terminals 3 and 4. This can be either direct voltage (DC) or alternating voltage
(AC). If a pulse is applied to the piezo disk, terminal 1 becomes positive in relation to terminal 2 due
to the voltage generated. The integrated switching element controls the electric circuit to be
switched.
and initial contact resistance is greater than 10 MOhm. When the piezo disk is actuated, the initial
contact resistance is reduced to less than 20 Ohm.
high resistance
3 of 23
1.1
Page
PRODUCT DESCRIPTION
Functional Description: NO Switch
Date of issue
19.05.2008
low resistance
Author:
SHO
Changes that contribute to technical improvement are subject to alternations.
high resistance.
Date of change:
Changed by:
9738
Change No.
Datasheet No.
105.9524.200
Print date: 29/05/2008 08:44:00
Index
-