B59601A0135A062 EPCOS Inc, B59601A0135A062 Datasheet - Page 14

• Manufacturer Part Number: B59601A0135A062
• Description: THERMISTOR PTC 470OHM 135DEG0603
• Manufacturer: EPCOS Inc
• Series: B59601r
• Type: PTCr

Specifications of B59601A0135A062

• Package / Case: 0603 (1608 Metric)
• Resistance In Ohms @ 25°c: 470
• Resistance Tolerance: ±50%
• Mounting Type: Non-Standard, Leadless
• Thermistor Type: PTC
• Resistance: 470ohm
• Svhc: No SVHC (18-Jun-2010)
• Body Diameter: 0.8mm
• External Length / Height: 1.6mm
• Operating Voltage: 32V
• Resistance Temperature: -40°C
• Rohs Compliant: Yes
• Termination Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Operating Temperature: -
• Power - Max: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 495-2414-2; B59601A 135A 62; B59601A135A62

Mounting instructions
1
1.1
Leaded PTC thermistors follow the solderability requirements of IEC 60068-2-20.
During soldering, care must be taken that the thermistors are not damaged by excessive heat.
The following maximum temperatures, maximum time spans and minimum distances have to be
observed:
Solderability
Resistance to
soldering heat
Distance to thermistor has to be 6 mm. Under more severe soldering conditions the resistance
may change. Soldering conditions for wave soldering are given in chapter 1.4.1.
1.2
In case of PTC thermistors without leads, soldering is restricted to devices which are provided
with a solderable metallization. The temperature shock caused by the application of hot solder
may produce fine cracks in the ceramic, resulting in changes in resistance.
In addition, soldering methods should be employed which permit short soldering times.
Soldering conditions for wave soldering are given in chapter 1.4.1.
1.3
The notes on soldering leadless thermistors also apply to the SMD versions (refer to
IEC 60068-2-58). Soldering conditions for wave soldering are given in chapter 1.4.1., for reflow
soldering in chapter 1.4.2.
1.3.1
(Sizes 0402, 0603, 0805, 1210)
As shown in the figure above, the terminations consists of three metallic layers. A primary chrome
layer provides for good electrical contact. "Leaching" is prevented by a nickel barrier layer. The
outer tin coating prevents corrosion of the nickel and ensures good component solderability.
Please read Cautions and warnings and
Important notes at the end of this document.
Sensors
Limit temperature sensors, EIA sizes 0603 and 0805
Soldering
Leaded PTC thermistors
Leadless PTC thermistors
SMD PTC thermistors
Chrome/nickel/tin terminations
Solder containing lead
(SnPb 60/40)
Solder bath temperature 230 C
Soldering time 3 s
Soldering iron temperature 350 C
Soldering time 3 s
Page 14 of 26
Lead-free solder
(Sn96.5Ag3Cu0.5)
Solder bath temperature 245 C
Soldering time 3 s
Solder bath temperature 260 C
Soldering time 10 s
Standard series