BD1020HFV-TR Rohm Semiconductor, BD1020HFV-TR Datasheet - Page 4

• Manufacturer Part Number: BD1020HFV-TR
• Description: IC TEMP SENSOR ANLG OUT 5-HVSOF
• Manufacturer: Rohm Semiconductor

Specifications of BD1020HFV-TR

• Sensing Temperature: -30°C ~ 100°C
• Output Type: Voltage
• Voltage - Supply: 2.5 V ~ 5.5 V
• Accuracy: ±1°C
• Package / Case: 5-HVSOF
• Product: Temperature Sensors
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

●Notes for use
BD1020HFV
© 2010 ROHM Co., Ltd. All rights reserved.
www.rohm.com
1) Absolute Maximum Ratings
2) GND voltage
3) Pin short and mistake fitting
4) Operation in strong electric field
5) Mutual impedance
6) Please connect it with the temperature measurement part (GND line usually) to make thermal conductivitywith the mount
An excess in the absolute maximum ratings, such as supply voltage, temperature range of operating conditions, etc., can
break down devices, thus making impossible to identify breaking mode such as a short circuit or an open circuit. If any
special mode exceeding the absolute maximum ratings is assumed, consideration should be given to take physical safety
measures including the use of fuses, etc.
Make setting of the potential of the GND terminal so that it will be maintained at the minimum in any operating state.
When mounting the IC on the PCB, pay attention to the orientation of the IC. If there is a placement mistake, the IC may be
burned up.
Be noted that using ICs in the strong electric field can malfunction them.
Use short and wide wiring tracks for the power supply and ground to keep the mutual impedance as small as possible.
Use a capacitor to keep ripple to a minimum.
board side the best though the PG pin (Pin NO.2) is hindered and doesn't exist about OPEN even if it connects it with GND.
4/5
Technical Note
2010.01 - Rev.B