ABL015-00 NVE, ABL015-00 Datasheet - Page 7

• Manufacturer Part Number: ABL015-00
• Description: SENSOR GEAR TOOTH DUAL 8MSOP
• Manufacturer: NVE
• Series: ABLr
• Type: Special Purposer

Specifications of ABL015-00

• Sensing Range: ±100Oe
• Voltage - Supply: 4.5 V ~ 36 V
• Current - Supply: 9mA
• Current - Output (max): 16mA
• Output Type: Analog, Ratiometric
• Features: Gear Tooth Type
• Operating Temperature: -50°C ~ 150°C
• Package / Case: 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
• For Use With: 391-1063 - KIT EVALUATION GT SENSOR391-1022 - KIT EVALUATION GT SENSOR
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 391-1036-5

AKL Sensors
Digital Output Gear Tooth And Encoder Sensors
Features:
•
•
•
•
•
•
Applications:
•
•
•
•
Description:
NVE offers these products specifically for use as sensors for gear tooth wheels or magnetic encoders
with a digital output signal. The pulse output from the sensor corresponds with the gear teeth passing
in front of it. When a gear tooth or magnetic pole is in front of the sensor, the sensor’s output goes
high; when the gear tooth or magnetic pole moves away, the output returns to low. This repeats at
every tooth/pole resulting in a pulse train output that provides speed information from the gear or
encoder. Three part numbers are currently available: the AKL001-12 is designed for gear teeth or
encoders with a pitch of 2.5 to 6 mm, the AKL002-12 for a pitch of 1 to 2.5 mm, and the AKL003-12
for a pitch of 0.6 to 1.5 mm.
In order to minimize the number of wires leading to the sensor, the part is configured as a two-wire
device. The two output states are indicated with a change of current through the part. Therefore, when
the part is in the digital low state, current is about 3 mA. When the part is in the digital high state, the
current increases to about 10 mA. If necessary, the two-wire output of the AKL-Series parts can be
easily converted to a three-wire current sinking output with the circuit shown in the GT Sensor
applications section.
The parts are rated for the full automotive and industrial temperature range, -40°C to +150°C. They
feature reverse battery protection and have an operational voltage range of 4.5V to 36V. They operate
from DC to 10 kHz. The parts are available in low-profile, surface mount TDFN SO8 packages.
Large Airgap
50% Duty Cycle
DC (Zero Speed) Operation
Precise Spacing Between Sensor Elements
Excellent Temperature and Voltage Performance
Small, Low-Profile Surface Mount Package
Anti-lock Brake System Sensors
Transmission Speed Sensors
Industrial Linear and Angular Speed Sensing
Linear and Angular Position Sensing
www.nve.com
phone: [phone] fax: [phone]
- 52 -