1.20.123.024/0000 RAFI, 1.20.123.024/0000 Datasheet - Page 5

• Manufacturer Part Number: 1.20.123.024/0000
• Description: CONTACT BLOCK, UNIVERSAL, 2NC
• Manufacturer: RAFI

Specifications of 1.20.123.024/0000

• No. Of Poles: 2
• Contact Voltage Ac Max: 250V
• Contact Voltage Dc Max: 250V
• Contact Current Rating: 6A
• Terminal Type: 2 N/C
• Contact Configuration: Operating Temperature
• Contact Current Max: 6A
• Rohs Compliant: Yes
• Operating Temperature Min: -25°C
• For Use With: RAFIX 16 Switches

2
RAFIX
16
RAFIX 16
CE-Conformity RAFIX
Assembly/Disassembly
2 - 6
All actuators
All contact blocks with silver contacts
Emergency stop
Contact blocks with silver contacts
Emergency stop, Universal
contact blocks with gold contacts
Signal indicator
lamp socket
Combination
actuator and
contact block
®
16
1.3007–.– – –
1.2012–.– – –
1.30074.– – –
1.20123.– – –
1.30074.– – –
1.20123.– – –
1.62124.– – –
1.71212.– – –
Order no.
Disassembly
– Turn the contact block by approx. 20° to the left or
– Pull the contact block off towards the rear (commercial-
To dismount a PCB, pull the PCB with the soldered plug-in
sockets off the mounted contact blocks.
Assembly
– Insert the actuator through the panel cut-out from the
– Screw the hexagon nut onto the actuator or signal indi-
– Slide the contact block onto the actuator from the rear
– Install protection against accidental contact, if applica-
– Connect quick-connect terminals.
– Alternatively, connect crimped female quick-connect
– Alternatively, conntact the plug-in socket soldered onto
cator from the rear and tighten it using a fixing spanner.
with an audible click.
ble.
terminals to multipole connector and plug it onto the
contact block.
the PCB.
right – the latches open.
ly available flat nose pliers recommended).
front.
If there is no locating indent provided in the cut-out,
first remove the locating lug using a screwdriver.
6(4) A/250 V AC
6(4) A/250 V AC
250 mA/42 V AC/DC
1,2 W/60 V AC/DC
Limit
NSR 73/23
–
Control Components
EU-Directive
Ma. Dir. 89/392
–
–