1.20126.403/0000 C&K Components, 1.20126.403/0000 Datasheet - Page 6

• Manufacturer Part Number: 1.20126.403/0000
• Description: CONTACT BLOCK 1NO/1NC, 100mA, SOLDER LUG
• Manufacturer: C&K Components

Specifications of 1.20126.403/0000

• No. Of Poles: 2
• Contact Current Max: 100mA
• Contact Voltage Ac Max: 42V
• Contact Voltage Dc Max: 42V
• Switch Terminals: Solder Lug
• For Use With: RAFIX 22 FS Series Switches
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2
RAFIX
16
RAFIX 16
Dimensional Drawings RAFIX 16
Actuator with contact block resp.
signal indicator with lamp socket
... with protection cage
... with multipole connector
... with PCB plug-in socket
2 - 6
Assembly/Disassembly
Disassembly
– Turn the contact block by approx. 20° to the left or
– Pull the contact block off towards the rear (commercial-
To dismount a PCB, pull the PCB with the soldered plug-
in sockets off the mounted contact blocks.
Assembly
– Insert the actuator through the panel cut-out from the
– If there is no locating indent provided in the cut-out,
– Screw the hexagon nut onto the actuator or signal indi-
– Slide the contact block onto the actuator from the rear
– Install protection against accidental contact, if
– Connect quick-connect terminals.
– Alternatively, connect crimped female quick-connect
– Alternatively, conntact the plug-in socket soldered onto
cator from the rear and tighten it using a fixing spanner.
with an audible click.
applicable.
terminals to multipole connector and plug it onto the
contact block.
the PCB.
right – the latches open.
ly available flat nose pliers recommended).
front.
first remove the locating lug using a screwdriver.
Control Components