704-6003 EAO, 704-6003 Datasheet - Page 56

• Manufacturer Part Number: 704-6003
• Description: Bezel
• Manufacturer: EAO

Specifications of 704-6003

• Contact Current Max: 10A
• For Use With: Series 04 Pushbutton Actuators
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

technical data
switching system
material
mechanical characteristics
slow-make switching element
switching system
The double-break, slow-make switching element is equipped with
one or two independent contact systems, acting as normally open
or normally closed contact.
Slow-make contacts with forced action are ideal for high switch ra-
tings. Up to 3 switching elements can be snapped to each actuator.
Up to 3 switching elements can be snapped to each actuator.
material of contacts
hardsilver, gold/silver, silver/palladium (for aggressive atmosphe-
res)
switching element
polycarbonate PC
connection method
screw terminals
plug-in terminals 6.3 x 0.8 mm:
max. wire cross-section: 2 x 2.5 mm&
max. wire cross-section of stranded cable: 2 x 1.5 mm&.
For switches with plug-in terminals it is necessary to provide insula-
tion sockets and to maintain a spacing of 65 mm between rows
(mounting dimensions).
starting torque
screws at the mounting flange: max. 25 Ncm
screws at switching element: max. 50 Ncm
actuating force
13-36 N
depending on the number of switching elements, 1 to 3 elements
storage temperature
-40°C to + 85°C
mechanical life
pushbuttons:
maintained action 1.5 million cycles of operation
momentary action 3 million cycles of operation
selector switch:
maintained action 1.25 million cycles of operation
momentary action 2.5 million cycles of operation
emergency stop switch: >= 50´000 cycles of operation
key lock switch:
maintained action 25´000 cycles of operation
momentary action 50´000 cycles of operation"
travel
5.8
resistance to shock
(single impacts, semi-sinusoidal)
30 g for 11 ms as per EN 60 947-5-1
resistance to vibration
(sinusoidal)
10 g at 10-2000 Hz, amplitude 0,75 mm as per EN 60 947-5-1
rebound time
<= 1 ms
0.2 mm
1 N
electrical characteristics
0
0
0
0
approvals
ambient air temperature
min. - 25°C (- 40° with restriction)
max. without illumination: + 80°C
max. with neon lamp + 80°C
max. with LED: + 80°C
max. with incandescent lamp: + 40°C
rated insulation voltage
500 VAC/600 VDC as per VDE 0100, group C
standards
The switches comply with the Rules for low-voltage switching de-
vices" EN 60 947-5-1
contact resistance
starting value <= 50 m
insulation resistance
>= 100 M
10.
continuous thermal current lth
10 A
The maximum current in continuous operation and at ambient tem-
perature must not exceed the quoted maximum values.
switch rating max.
at switch rating AC for gold-, silver- and hard silver contacts service
category AC-15 as per EN60947-5-1
(cos
voltage:
current:
at switch rating DC for gold-, silver- and hard silver contacts service
category DC as per EN60947-5-1
L/R=100 ms at P>=50 W and
L/R=2 x P ms<50 W
WOP stands for switch rating in watt
voltage:
current:
switch rating min.
gold/silver contacts:
voltage
current:
hard silver contakts:
voltage
current:
electric strength
5000 VAC, 50 Hz, 1 min. between all terminals and earth
approvals
- SEV 500 VAC/10 A
- CSA 300 VAC
- UL 600 VAC HD
- German Navy SAK page no.3337 on request
- German Lloyd
- CE (declaration of conformity)
- CB
= 0.7)
between open contacts at 500 VDC, as per IEC 512-2-
230 VAC
7 A
24 VDC
10 A
24 VDC
10 mA
24 VDC
50 mA
as per IEC 512-2-4
2
400 VAC
5 A
60 VDC
5 A
110 VDC
2 mA
110 VDC
10 mA
01.2002
119
500 VAC
4 A
110 VDC
2.5 A
04