704.010.5 EAO, 704.010.5 Datasheet - Page 15

• Manufacturer Part Number: 704.010.5
• Description: Switch Actuator
• Manufacturer: EAO
• Series: 04r

Specifications of 704.010.5

• Operating Force Max: 8N
• Mounting Hole Dia: 22.5mm
• Contact Voltage Ac Max: 500V
• Switch Operation: (ON)
• Contact Current Ac Max: 10A
• Switch Terminals: Screw / Plug-In
• Actuator / Cap Color: Green
• Rohs Compliant: Yes
• Actuator Style: Round-Extended
• For Use With: 04 Series Non-Illuminated Pushbutton Switches
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Series 04
Snap-action switching element
Switching system
The double-break, snap-action switching element is equipped with
one or two independent contact systems, acting as normally open
or normally closed contact. The snap-action switching element is
fitted with self-cleaning contacts. Up to 3 switching elements can
be snapped to each actuator.
Material
Material of contacts
hardsilver, gold/silver, silver/palladium (for aggressive atmospheres)
Switching element
polycarbonate PC
Mechanical characteristics
Connection method
screw terminals
plug-in terminals 6.3 x 0.8 mm:
max. wire cross-section: 2 x 2.5 mm
max. wire cross-section of stranded cable: 2 x 1.5 mm
For switches with plug-in terminals it is necessary to provide insulation
sockets and to maintain a spacing of 65 mm between rows
(mounting dimensions).
Starting torque
screws at the mounting flange: max. 25 Ncm
screws at switching element: max. 50 Ncm
Actuating force
11-20 N ± 1 N
depending on the number of switching elements, 1 to 3 elements
Storage temperature
-40°C to + 85°C
Mechanical life
pushbuttons:
selector switch:
e-stop switch:
keylock switch:
Rebound time
<= 3 ms
Travel
5.8 ± 0.2 mm
Resistance to shock
(single impacts, semi-sinusoidal)
30 g for 11 ms as per EN 60 947-5-1
Resistance to vibration
(sinusoidal)
10 g at 10-2000 Hz, amplitude 0,75 mm as per EN 60 947-5-1
Ambient air temperature
min. - 25°C (- 40° with restriction)
max. without illumination: + 80°C
max. with neon lamp + 80°C
max. with LED: + 80°C
max. with incandescent lamp: + 40°C
(as per DIN IEC 68-)
www.eao.com
40
- maintained action 1.5 million cycles of operation
- momentary action 3 million cycles of operation
- maintained action 1.25 million cycles of operation
- momentary action 2.5 million cycles of operation
- >= 50´000 cycles of operation
- maintained action 25´000 cycles of operation
- momentary action 50´000 cycles of operation
Electrical characteristics
Rated insulation voltage
500 VAC/600 VDC as per VDE 0100, group C
Standards
The switches comply with the "Standards for low-voltage switching
devices" EN 60 947-5-1
Contact resistance
starting value <= 50 m
Insulation resistance
>= 10 m
Continuous thermal current lth
10 A
The maximum current in continuous operation and at ambient
temperature must not exceed the quoted maximum values.
Switch rating max.
at switch rating AC for gold-, silver- and hard silver contacts
service category AC-15 as per EN60947-5-1 (cos
voltage:
current:
at switch rating DC for gold-, silver- and hard silver contacts
service category DC as per EN60947-5-1
L/R=100 ms at P>=50 W and
L/R=2 x P ms<50 W
WOP stands for switch rating in watt
voltage:
current:
Switch rating min.
gold/silver contacts:
voltage:
current:
hard silver contacts:
voltage:
current:
Electric strength
5000 VAC, 50 Hz, 1 min. between all terminals and earth.
Approvals
- SEV 500 VAC/10 A
- CSA 300 VAC
- UL 600 VAC HD
- German Navy
- German Lloyd
- CE (declaration of conformity)
- CB
Slow-make switching element
Switching system
The double-break, slow-make switching element is equipped with
one or two independent contact systems, acting as normally open
or normally closed contact. Slow-make contacts with forced action
are ideal for high switch ratings. Up to 3 switching elements can be
snapped to each actuator.
Material
Material of contacts
hardsilver, gold/silver, silver/palladium (for aggressive atmospheres)
Switching element
polycarbonate PC
between open contacts at 500 VDC, as per IEC 512-2-10
230 VAC 400 VAC 500 VAC
6 A
24 VDC
10 A
5 VDC
15 mA
24 VDC
50 mA
as per IEC 512-2-4
4 A
60 VDC 110 VDC
3 A
24 VDC 110 VDC
5 mA
110 VDC
10 mA
2
Technical Data
2.5 A
1 A
2 mA
o
= 0.7)