G32A-A40VD DC524 Omron, G32A-A40VD DC524 Datasheet - Page 6

• Manufacturer Part Number: G32A-A40VD DC524
• Description: SSR, DIN RAIL MOUNT, 264VAC, 24VDC, 40A
• Manufacturer: Omron

Specifications of G32A-A40VD DC524

• Control Voltage Type: DC
• Control Voltage Range: 5VDC To 24VDC
• Operating Voltage Range: 19VAC To 264VAC
• Load Current: 40A
• Switching Mode: Zero Cross
• Relay Terminals: Screw
• Mounting Type: DIN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

■ Replacement Procedure
G32A-A10(L)-VD/G32A-A20(L)-VD/G32-A420-VD(-2)
To remove or replace the Power Device Cartridge, use the special tool provided with it for extraction.
Extraction
Follow the procedures below to dismount the Power Device
Cartridge from the G3PA.
1. Switch off the power.
2. Remove the terminal cover.
3. Hook the indented part of the cartridge with the tool and pull up
Mounting
Follow the procedures below to mount the Power Device Cartridge
on the G3PA.
1. Apply silicone grease (provided with the G32A-A) to the entire
G32A-A40(L)-VD/G32A-A60(L)-VD/G32A-A430-VD(-2)/G32A-A450-VD-2
The G32A Power Device Cartridge is mounted and secured with screws to the G3PA Unit.
Extraction
Follow the procedures below to dismount the G32A-A Power Device
Cartridge from the G3PA.
1. Switch off the power.
2. Remove the terminal cover.
3. Loosen the two centered screws on the sides to dismount the
4. Loosen the screws on both the corners.
5. Hold the indented part of both the corners to dismount the
on the cartridge to remove it.
surface of the heat sink.
cartridge. The screws are connected to terminals 1 and 2.
cartridge.
Loosen
Hook here with
Remover.
Loosen
Remover
Loosen
Loosen
2. Make sure that there is no dust or pieces of wire on the heat sink
3. Insert the cartridge into the opening of the G3PA so that the
4. Attach the terminal cover.
5. Switch on the power and check the G3PA to be sure it works
Mounting
1. Apply silicone grease to the entire surface of the heat sink.
2. Make sure that there is no dust or pieces of wire on the heat sink
of the G32A-A or the G3PA.
letters on the cartridge and those on the G3PA are in the same
direction and side A and side B are even.
properly.
of the G32A-A or the G3PA.
Side A
Apply silicone grease here.
Apply silicone grease here.
Side B
G3PA
6