PIC18C658-I/PT Microchip Technology, PIC18C658-I/PT Datasheet - Page 9

• Manufacturer Part Number: PIC18C658-I/PT
• Description: 32 KB OTP, 1536 RAM, 52 I/O 64 TQFP 10x10x1mm TRAY
• Manufacturer: Microchip Technology
• Series: PIC® 18Cr

Specifications of PIC18C658-I/PT

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 52
• Program Memory Size: 32KB (16K x 16)
• Program Memory Type: OTP
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• Processor Series: PIC18C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 1536 B
• Interface Type: 3-Wire, I2C, SPI, USART, CAN
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 52
• Number Of Timers: 4 bit
• Operating Supply Voltage: 2.5 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: ICE2000, DM163007, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 6
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT64PT5 - SOCKET TRAN ICE 64MQFP/TQFPAC164319 - MODULE SKT MPLAB PM3 64TQFPDV007003 - PROGRAMMER UNIVERSAL PROMATE II
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: PIC18C658I/PT

5. Module: Interrupts
REGISTER 7-1:
FIGURE 1:
 2003 Microchip Technology Inc.
The operation of the GIE/GIEH bit (INTCON<7>) is
clarified as follows: when the bit is cleared, all
interrupts are disabled. This is regardless of the
state of the IPEN bit (RCON<7>), the priority of the
interrupt, or whether or not the interrupt is
unmasked. This varies from the original descrip-
tion, in which clearing the bit when IPEN = 1 would
only disable high priority interrupts.
The seventh paragraph in Section 7.0 of the
Device Data Sheet (beginning “When an interrupt
is responded to....”) is amended by adding the fol-
lowing sentence to the end:
Low Priority Interrupt Generation
Peripheral Interrupt Enable bit
Peripheral Interrupt Priority bit
Peripheral Interrupt Flag bit
bit 7
TMR1IE
TMR1IP
TMR1IF
XXXXIE
XXXXIP
XXXXIF
INTERRUPT LOGIC (EXCERPT)
INTCON REGISTER (EXCERPT)
GIE/GIEH: Global Interrupt Enable bit
When IPEN (RCON<7>) = 0:
1 = Enables all unmasked interrupts
0 = Disables all interrupts
When IPEN (RCON<7>) = 1:
1 = Enables all high priority interrupts
0 = Disables all interrupts
Additional Peripheral Interrupts
TMR0IE
TMR0IP
TMR0IF
INT1IF
INT1IE
INT1IP
INT2IF
INT2IE
INT2IP
RBIF
RBIE
RBIP
“It is important to note, however, that clearing the
GIE/GIEH bit, regardless of the state of the IPEN
bit, will disable all interrupts.”
The changes to the bit descriptions in Register 7-1
in the Device Data Sheet are shown in the excerpt
below (changes in bold).
Also, the interrupt logic funnel shown in Figure 7-1
of the Device Data Sheet is amended with the
addition of a GIE/GIEH control line, as shown in
Figure 1 (new material in bold line).
PIC18C658/858
GIEL/PEIE
GIE/GEIH
DS80126C-page 9
Interrupt to CPU
Vector to Location
0018h