LP2985AIM5X-3.3 National Semiconductor, LP2985AIM5X-3.3 Datasheet - Page 20

• Manufacturer Part Number: LP2985AIM5X-3.3
• Description: IC,VOLT REGULATOR,FIXED,+3.3V,BIPOLAR,TSOP,5PIN,PLASTIC
• Manufacturer: National Semiconductor

Specifications of LP2985AIM5X-3.3

• Rohs Compliant: NO

www.national.com
Physical Dimensions
NOTES: UNLESS OTHERWISE SPECIFIED
1. EPOXY COATING
2. 63Sn/37Pb EUTECTIC BUMP
3. RECOMMEND NON-SOLDER MASK DEFINED LANDING PAD.
4. PIN 1 IS ESTABLISHED BY LOWER LEFT CORNER WITH RESPECT TO TEXT ORIENTATION. REMAINING PINS ARE NUMBERED COUNTER
CLOCKWISE.
5. XXX IN DRAWING NUMBER REPRESENTS PACKAGE SIZE VARIATION WHERE X1 IS PACKAGE WIDTH, X2 IS PACKAGE LENGTH AND X3 IS
PACKAGE HEIGHT.
6.NO JEDEC REGISTRATION AS OF AUG.1999.
For Order Numbers, refer to Table 1 “Ordering Information” section of this document.
micro SMD, 5 Bump, Package (BLA05 - 300 µm ball)
inches (millimeters) unless otherwise noted (Continued)
The dimensions for X1, X2 and X3 are as given:
NS Package Number BLA05A
X1 = 1.057 +/− 0.030mm
X2 = 1.412 +/− 0.030mm
X3 = 0.945 +/− 0.100mm
20