LM2941CS National Semiconductor, LM2941CS Datasheet - Page 8

• Manufacturer Part Number: LM2941CS
• Description: Linear Voltage Regulator IC
• Manufacturer: National Semiconductor

Specifications of LM2941CS

• No. Of Pins: 5
• Output Current: 1A
• Termination Type: SMD
• Mounting Type: Through Hole
• Output Voltage Min: 5V
• Voltage Regulator Type: LDO Linear
• Peak Reflow Compatible (260 C): No
• Supply Voltage: 26V
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

* Required if regulator is located far from power supply filter.
** C
must be at least 22μF to maintain stability. May be increased without bound to maintain regulation during transients. Locate as close as possible to the
OUT
regulator. This capacitor must be rated over the same operating temperature range as the regulator and the ESR is critical; see curve.
1A Switch
882306
*** To assure shutdown, select Resistor R3 to guarantee at least 300μA of pull-up current when S1 is open. (Assume 2V at the ON/OFF pin.)
www.national.com
8