DS92CK16TMTC National Semiconductor, DS92CK16TMTC Datasheet - Page 11

• Manufacturer Part Number: DS92CK16TMTC
• Description: IC,Six Distributed-Output Clock Driver,CMOS,TSSOP,24PIN,PLASTIC
• Manufacturer: National Semiconductor

Specifications of DS92CK16TMTC

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Applications Information
Surface mount 1% to 2% resistors are best.
PROBING BLVDS TRANSMISSION LINES
Always use high impedance (
(
Improper probing will give deceiving results.
CABLES AND CONNECTORS, GENERAL COMMENTS
Use controlled impedance media. The connectors you use
should have a matched differential impedance of about
Zo Ω. They should not introduce major impedance disconti-
nuities.
<
2pF) scope probes with a wide bandwidth (1GHz) scope.
>
100kΩ), low capacitance
(Continued)
11
Balanced cables (e.g. twisted pair) are usually better than
unbalanced cables (ribbon cable, simple coax.) for noise
reduction and signal quality. Balanced cables tend to gener-
ate less EMI due to field canceling effects and also tend to
pick up electromagnetic radiation a common-mode (not dif-
ferential mode) noise which is rejected by the receiver. For
cable distances
effectively. For distances 0.5M ≤ d ≤ 10M, CAT 3 (category 3)
twisted pair cable works well, is readily available and rela-
tively inexpensive.
<
0.5M, most cables can be made to work
www.national.com