ACS712ELCTR-20A-T Allegro Microsystems Inc, ACS712ELCTR-20A-T Datasheet - Page 11

• Manufacturer Part Number: ACS712ELCTR-20A-T
• Description: IC, HALL EFFECT SENSOR, Linear, SOIC-8
• Manufacturer: Allegro Microsystems Inc
• Series: -r

Specifications of ACS712ELCTR-20A-T

• Msl: MSL 2 - 1 Year
• Termination Type: SMD
• No. Of Pins: 8
• Hall Effect Type: Linear
• Operating Temperature Range: -40°C To +85°C
• Supply Voltage Min: 4.5V
• Accuracy %: 1.5%
• Output Current: 10mA
• Featured Product: Allegro® ACS712 Current Sensor IC
• Current - Sensing: ±20A
• Accuracy: ±1.5%
• Sensitivity: 96 ~ 104 mV/A
• Current - Supply: 10mA
• Sensor Type: Hall Effect
• Voltage - Supply: 4.5 V ~ 5.5 V
• Output: 2.5V
• Frequency: 80kHz
• Response Time: 5µs
• Polarization: Bidirectional
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-SOIC (0.154", 3.90mm Width)
• Filter Terminals: SMD
• Rohs Compliant: Yes
• Bandwidth: 80kHz
• Leaded Process Compatible: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

ACS712
Chopper Stabilization is an innovative circuit technique that is
used to minimize the offset voltage of a Hall element and an asso-
ciated on-chip amplifier. Allegro patented a Chopper Stabiliza-
tion technique that nearly eliminates Hall IC output drift induced
by temperature or package stress effects. This offset reduction
technique is based on a signal modulation-demodulation process.
Modulation is used to separate the undesired DC offset signal
from the magnetically induced signal in the frequency domain.
Then, using a low-pass filter, the modulated DC offset is sup-
pressed while the magnetically induced signal passes through
Hall Element
with
Chopper Stabilization Technique
2.1 kVRMS
Regulator
Fully Integrated, Hall Effect-Based Linear Current Sensor IC
Concept of Chopper Stabilization Technique
Isolation and a Low-Resistance Current Conductor
the filter. As a result of this chopper stabilization approach, the
output voltage from the Hall IC is desensitized to the effects
of temperature and mechanical stress. This technique produces
devices that have an extremely stable Electrical Offset Voltage,
are immune to thermal stress, and have precise recoverability
after temperature cycling.
This technique is made possible through the use of a BiCMOS
process that allows the use of low-offset and low-noise amplifiers
in combination with high-density logic integration and sample
and hold circuits.
Clock/Logic
Amp
115 Northeast Cutoff
1.508.853.5000; www.allegromicro.com
Allegro MicroSystems, Inc.
Worcester, Massachusetts 01615-0036 U.S.A.
Low-Pass
Filter
11