LP2975AIMM-5.0 National Semiconductor, LP2975AIMM-5.0 Datasheet - Page 4

• Manufacturer Part Number: LP2975AIMM-5.0
• Description: IC, LDO VOLT REG, 5V, 5A, 8-SOIC
• Manufacturer: National Semiconductor

Specifications of LP2975AIMM-5.0

• Primary Input Voltage: 24V
• Output Voltage Fixed: 5V
• Dropout Voltage Vdo: 323mV
• No. Of Pins: 8
• Output Current: 5A
• Operating Temperature Range: -40°C To +125°C
• Device Type: LDO
• Termination Type: SMD
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Electrical Characteristics
(Continued)
Note 2: The LP2975 has internal thermal shutdown which activates at a die temperature of about 150˚C. It should be noted that the power dissipated within the
LP2975 is low enough that this protection circuit should never activate due to self-heating, even at elevated ambient temperatures.
Note 3: Limits are 100% production tested at 25˚C. Limits over the operating temperature range are guaranteed through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate National’s Average Outgoing Quality Level (AOQL).
Typical Application Circuits
@
5V - 3.3V
5A LDO Regulator
10003403
*See Application Hints.
**If current limiting is not required, short out this resistor.
www.national.com
4