0460-202-16141 DEUTSCH, 0460-202-16141 Datasheet - Page 11

• Manufacturer Part Number: 0460-202-16141
• Description: CRIMP CONTACT, PIN, SIZE16, 16-18AWG
• Manufacturer: DEUTSCH
• Series: DTr

Specifications of 0460-202-16141

• Connector Type: Contact, Crimp
• Contact Plating: Nickel
• Contact Material: Copper Alloy
• Contact Size: 16
• Svhc: No SVHC
• Contact Termination: Crimp
• For Use With: Deutsch's DT Series
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Stamped & Formed Contacts
The Deutsch range of Stamped & Formed contacts are designed primarily
for use where wire termination costs are of primary concern without
sacrificing the reliability and maintainability of the normal operating
electrical circuits.
Design and Materials Selection
Deutsch engineers have combined the process of superior material selection
with outstanding mechanical Cad-Cam Designs to present stamped & formed
contacts that exceed the demands of today’s truck, bus and off-highway
electrical systems.
The selection of copper alloys, finished after forming with nickel plating
Features
Stainless Steel Socket Sleeve
Contact Tines are in Socket Member, Not Pin
No Lances / Tangs
Bullet (Rounded) Pin Nose
Nickel Plating
Plated After Forming
Optional Gold Plating
No Individual wire Seal Grommets
Pre-Bent Core Wings
Improved Die Stop Gap
Off-Set Configuration
Copper Alloy Materials
Stamped & Formed Contacts
1060-20-0122 20 Pin
1060-20-0122 20 Socket 16, 18 & 20 AWG (1.0-0.5mm
1060-20-0222 20 Pin
1060-20-0222 20 Socket 16, 18 & 20 AWG (1.0-0.5mm
1060-16-0622 16 Pin
1060-16-0622 16 Socket 16, 18 & 20 AWG (0.50-1.0mm
1060-16-0122 16 Pin
1060-16-0122 16 Socket 16 & 18 AWG (0.75-1.5mm
1060-14-0122 16 Pin
1060-14-0122 16 Socket 14 & 16 AWG (2.0-1.0mm
1060-12-0166 12 Pin
1060-12-0166 12 Socket 12 & 14 AWG (4.0-2.0mm
Part Number
Contact
Size &
Type
16, 18 & 20 AWG (1.0-0.5mm
16, 18 & 20 AWG (1.0-0.5mm
16, 18 & 20 AWG (0.50-1.0mm
16 & 18 AWG (0.75-1.5mm
14 & 16 AWG (2.0-1.0mm
12 & 14 AWG (4.0-2.0mm
See Table Below
Recommended
Wire Gauge Range
Strip Length
Provides closed entry design preventing probe damage.
Terminal contact points are protected from handling and assembly damage.
Contact retention is designed in the connector body, eliminating retention problems during handling and rework.
Prevents mismating and bent pins.
Reduces oxidations, thus improving conductivity performance.
No base metal is exposed to corrosion.
Available for dry circuit application.
Wire seals are designed as an integral component of the connector, thus reducing wire terminating costs.
Provides an air-tight crimp joint.
Allows application die to position wire for proper crimp length.
Provides centre wire alignment between conductor and insulation.
Prevents material relaxation over time, providing reliable crimp joints and increased durability
2
2
2
2
)
)
)
)
2
2
)
)
2
2
2
2
Benefits
)
)
)
)
2
2
)
)
0.075-0.125 (1.90-3.15mm) .150-2.00 (3.81-5.08mm) DTT-20-00 DCT20-02-00
0.075-0.125 (1.90-3.15mm) .150-2.00 (3.81-5.08mm) DTT-20-00 DCT20-02-00
0.050-0.085 (1.3-2.15mm)
0.050-0.085 (1.3-2.15mm)
.055-.083 (1.40-2.10mm)
.055-.083 (1.40-2.10mm)
.075-0.115 (1.90-2.92mm)
.075-0.115 (1.90-2.92mm)
.095-0.150 (2.41-3.81mm)
.095-0.150 (2.41-3.81mm)
.113-0.170 (2.87-4.32mm)
.113-0.170 (2.87-4.32mm)
Insulation O.D.
11
provides superior durability, performance, corrosion and oxidation resistance.
To achieve air-tight crimps that eliminate the need to solder after wire
terminations, Deutsch engineers have specified that the core-wing ends be
formed in the direction of the crimp, thus assuring resistance to crimp
relaxation and displacement of metal,crimp after crimp.
True to all Deutsch terminals, the split socket (female) tines, protected by a
closed entry stainless steel sleeve, ensure controlled contact pressure for
maximum conductivity with minimum surface wear.
In keeping with the Deutsch commitment to quality, all stamped & formed
contacts are manufactured using SPC controls and are subjected to extensive
programs of rigid testing, including field performance feedback.
All Strands Captivated
.150-2.00 (3.81-5.08mm) DTT-20-00 DCT20-02-00
.150-2.00 (3.81-5.08mm) DTT-20-00 DCT20-02-00
.150-2.00 (3.81-5.08mm) DTT-16-00 DCT16-02-00
.150-2.00 (3.81-5.08mm) DTT-16-00 DCT16-02-00
.150-2.00 (3.81-5.08mm) DTT-16-00 DCT16-02-00
.150-2.00 (3.81-5.08mm) DTT-16-00 DCT16-02-00
.150-2.00 (3.81-5.08mm) DTT-16-00 DCT16-02-00
.150-2.00 (3.81-5.08mm) DTT-16-00 DCT16-02-00
.225-.275 (5.72-6.99mm) DTT-12-00 DCT12-02-00
.225-.275 (5.72-6.99mm) DTT-12-00 DCT12-02-00
Recommended
Strip Length
Insulation Spaced From
Conductor Crimp Area
Bare Wire Strands Extended
From Conductor Crimp
Crimp Tool
Hand
Crimp Tool
Production