CL142001 Souriau Connection Technology, CL142001 Datasheet - Page 17

• Manufacturer Part Number: CL142001
• Description: DUST CAP, SIZE 2
• Manufacturer: Souriau Connection Technology

Specifications of CL142001

• Connector Shell Size: 2
• Connector Body Material: Thermoplastic
• Svhc: No SVHC (15-Dec-2010)
• Colour: Black
• Connector Type: Dust Cap & Cover
• Flammability: RoHS Compliant
• Accessory Type: Dust Cap
• For Use With: Sealed Connectors

Manual Crimping Tool
Stamped and Formed Contacts (#16 and #20)
Machined Crimping Contacts (#16 and #20)
8365-02
Y16SCMCL3
locator
8365
with
CLIPPER
• Squeeze the plier handles until a final click sounds, release, the pliers
• Fully insert the contact into the locator (corresponding gauge), the
• Put the stripped wire in the crimping part until it comes in contact with the
• Squeeze the plier handles until a final click sounds, release, the pliers
• Check the overall aspect of the crimping.
• Push the cable into the contact barrel and make sure the cable strands
• The pliers must be used on the jaws side.
• Squeeze the plier handles until a final click sounds, release, the pliers
• Insert both wire and contact (or wire, reducing sleeve and contact)
• Fully squeeze until a final click sounds, the pliers should open once the
• Extract the wire and crimped contact, then check the overall aspect of
should open by themselves.
contact crimping lugs should be directed upwards, according to the
drawing.
stopper plate. Make sure that no strands stick out of the crimping part.
should open by themselves.
stick out of the inspection hole.
should open by themselves.
between the 4 jaws until stopped by the locator.
crimping is performed
the crimping.
17