13226PRO-DBG Freescale Semiconductor, 13226PRO-DBG Datasheet - Page 5

• Manufacturer Part Number: 13226PRO-DBG
• Description: KIT DEV PRO ZIGBEE 1322X
• Manufacturer: Freescale Semiconductor
• Type: Transceiver, ZigBeer

Specifications of 13226PRO-DBG

• Frequency: 2.4GHz
• Wireless Frequency: 2.4 GHz
• Interface Type: USB, JTAG
• Operating Voltage: 2 V to 3.6 V
• Operating Temperature Range: - 40 C to + 105 C
• For Use With/related Products: MC1322x
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2.2
Freescale Semiconductor
•
•
•
•
•
•
•
•
IEEE 802.15.4 standard compliant on-chip transceiver/modem
— 2.4 GHz ISM Band operation
— 16 selectable channels
— Programmable transmitter output power (-30 dBm to +4 dBm typical)
— World-class receiver sensitivity
Hardware acceleration for IEEE 802.15.4 applications
— MAC accelerator (sequencer and DMA interface)
— Advanced encryption/decryption hardware engine (AES 128-bit)
Supports standard IEEE 802.15.4 signaling with 250 kbps data rate
32-bit ARM7TDMI-S CPU core with programmable performance up to 26 MHz (24 MHz typical)
Extensive on-board memory resources
— 128 Kbyte serial FLASH memory (will be mirrored into RAM)
— 96 Kbyte SRAM
— 80 Kbyte ROM
Best-in-class power dissipation
— 22 mA typical RX current draw (DCD mode) with radio and MCU active
— 29 mA typical TX current draw with radio and MCU active (coin cell capable)
— 3.3 mA typical current draw with MCU active (radio off)
— 0.8 mA typical current with MCU idle (radio off)
— 0.85 μA typical Hibernate current (retain 8 Kbyte SRAM contents)
— 0.4 μA maximum Off current (device in reset)
Extensive sleep mode control and variation
— Hibernate and Doze low power modes
— Programmable degree of power down
— Clock management
— Onboard 2 kHz oscillator for wake-up timer.
— Optional 32.768 kHz crystal oscillator for accurate real-time sleep mode timing and wake-up
— Wake-up through programmable timer, external real-time interrupts, or ADC timer
Extensive MCU peripherals set
— Dedicated 802.15.4 modem/radio interface module (RIF)
— Dedicated NVM SPI interface for managing FLASH memory
— Two dedicated UART modules capable of 2 Mbps with CTS/RTS support
— SPI port with programmable master and slave operation
Features Summary
– < -96 dBm typical receiver sensitivity using DCD mode (<1% PER, 20-byte packets)
– < -100 dBm typical receiver sensitivity using NCD mode (<1% PER, 20-byte packets)
with a possible sleep period greater than 36.4 hours
MC1322x Technical Data, Rev. 1.3
5