31-335 AMPHENOL RF, 31-335 Datasheet - Page 6

• Manufacturer Part Number: 31-335
• Description: BNC RIGHT ANGLE CRIMP RG-58
• Manufacturer: AMPHENOL RF
• Series: BNCr
• Type: Cable Plugr

Specifications of 31-335

• Connector Style: BNC
• Connector Type: Plug, Male Pins
• Contact Termination: Crimp, Dual
• Impedance: 50 Ohm
• Mounting Type: Free Hanging (In-Line), Right Angle
• Fastening Type: Bayonet Lock
• Cable Group: RG-58, 58C, 141, Belden 89907, 7806A
• Frequency - Max: 4GHz
• Frequency-max: 4GHz
• Body Style: Right Angle Plug
• Coaxial Termination: Crimp
• Rg Cable Type: RG-58, 141
• Contact Material: Brass
• Contact Plating: Gold
• Frequency Max: 4GHz
• Angle: Right Angle
• Application: Commercial
• Cable Type: RG-58/U,RG/U 141,58,58C
• Finish, Housing: Nickel
• Gender: Plug
• Material, Contact: Brass (Male), Beryllium Copper⁄Phosphor Bronze (Female)
• Material, Dielectric: TFE/Styrene
• Material, Housing: Brass
• Mating Type: Bayonet
• Primary Type: BNC
• Temperature, Operating: -65 to +165 °C
• Termination: Crimp
• Voltage, Rating: 500 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Color: -
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: 031-335; ARF1055

Assembly Instructions-C28
BNC
SURETWIST
Amphenol Corporation Tel: [phone]
Step 1
Step 2
Step 3
Step 4
Back end of connector and
cable dielectric flush,
center conductor in place
®
PLUG
.250
(6.4)
.813
(20.7)
.563
(14.3)
.031
(0.8)
31-5136
31-5136-RFX
31-5137
31-5137-RFX
min. of cable
Amphenol
Number
dielectric
BNC SURETWIST® plug
BNC Plug
BNC Plug
BNC Plug
BNC Plug
Connector
Type
303
Step 1 Strip cable as shown. Take care not to nick center
Step 2 Twist outer braid in a clockwise direction so that at least
Step 3 Gently insert center conductor into back end of connector,
Step 4 Push the cable firmly home (as far as possible). Then screw
conductor or outer braid.
1/32" of cable dielectric is bared, and braid is left flat. (Stray
or loose braid can cause shorts.)
"feeling" it into the guide hole. (If center conductor is NOT
properly in place, about 1/8" of center conductor will show at
the back end. Reinsert until cable dielectric reaches position
shown in illustration.)
the connector onto the cable in a clockwise direction until it
stops. Assembly is complete.
59
59
58
58
RG-/U
Cable
Amphenol
www.amphenolrf.com
®