STM32W108B-SK STMicroelectronics, STM32W108B-SK Datasheet - Page 22

• Manufacturer Part Number: STM32W108B-SK
• Description: STARTER KIT FOR STM32W108
• Manufacturer: STMicroelectronics
• Series: STM32r
• Type: MCUr

Specifications of STM32W108B-SK

• Featured Product: STM32 Cortex-M3 Companion Products
• Contents: Board
• Silicon Manufacturer: ST Micro
• Core Architecture: ARM
• Core Sub-architecture: Cortex - M3
• Silicon Core Number: STM32
• Silicon Family Name: STM32W108xx
• Kit Contents: Board
• Features: IEEE
• Mfg Application Notes: STM32W108 Adjacent Channel Rejection Measurements
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: *
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Running the STM32W108xx kits
2.3.1
22/36
Run the remote control (RC) and virtual TV applications
The STM32-Primer2 tool provided with the STM32W-SK starter kit is delivered with the RC
application. This application automatically configures the connected MB850 extension board
with the related ZigBee RF4CE RC application.
The application board is automatically configured when launching the RF4CETV PC applet.
To run the RC and TV applications on the STM32 Primer2, MB850 and application board
platforms, the following steps are required:
1.
2.
3.
4.
5.
6.
7.
8.
If everything is properly done, a message on your STM32-Primer2 screen and in the
RF4CETV applet informs you that the pairing process has been successful.
Figure 11. RF4CETV PC applet
Connect the MB850 to the extension connector of the STM32-Primer2 tool.
Power on your STM32-Primer2.
Press the joystick button to launch the Main Menu and select Applic.->RF4CE RC.
If everything is properly done, the LCD screen displays a set of RF4CE RC commands.
Connect the application board to the PC using a mini USB cable with P2 fitted in
position 5-6 (power from USB). A virtual COM port should appear in the Windows
Device Manager.
From Windows, launch the RF4CETV.exe PC applet. A PC applet GUI appears.
Select the serial port matching the port assigned by the Windows Device Manager. If
the firmware on the application board is not present, the application uploads the
firmware through the serial port. Wait until the LED D1 is on.
Push the button
blinking quickly when the node is ready for pairing (for 30 sec.).
On your STM32-Primer2, use the joystick to scroll between button pages until you find
the button
. Push the button to start pairing with the application board.
to start pairing with the RF4CE remote control. LED D1 starts
Doc ID 16999 Rev 4
UM0894