IR3865MTRPBF International Rectifier, IR3865MTRPBF Datasheet - Page 19

• Manufacturer Part Number: IR3865MTRPBF
• Description: IC BUCK SYNC ADJ 10A PQFN
• Manufacturer: International Rectifier
• Series: SupIRBuck™r
• Type: Step-Down (Buck), PWMr

Specifications of IR3865MTRPBF

• Internal Switch(s): Yes
• Synchronous Rectifier: Yes
• Number Of Outputs: 1
• Voltage - Output: 0.5 V ~ 12 V
• Current - Output: 10A
• Frequency - Switching: Up to 750kHz
• Voltage - Input: 3 V ~ 21 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: *
• Package / Case: *
• Primary Input Voltage: 21V
• No. Of Outputs: 1
• Output Voltage: 12V
• Output Current: 10A
• No. Of Pins: 17
• Operating Temperature Range: -40°C To +125°C
• Msl: MSL 3 - 168 Hours
• Rohs Compliant: Yes
• Leaded Process Compatible: Yes
• Part Status: Preferred
• Package: PQFN / 4 x 5
• Circuit: Single Output
• Iout (a): 10
• Switch Freq (khz): 0 - 750
• Input Range (v): 3.0 - 21
• Output Range (v): 0.5 - 12
• Ocp Otp Uvlo Pre-bias Soft Start And: Constant On-Time + PGOOD + EN + Temp Comp OCP
• Digital Home Media: Yes
• Mobile Computing: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

IR3865MBF
Solder Resist
It is recommended that the lead lands are Non Solder Mask Defined (NSMD). The solder resist
should be pulled away from the metal lead lands by a minimum of 0.025mm to ensure NSMD pads.
The land pad should be Solder Mask Defined (SMD), with a minimum overlap of the solder resist
onto the copper of 0.05mm to accommodate solder resist misalignment.
Ensure that the solder resist in between the lead lands and the pad land is ≥ 0.15mm due to the
high aspect ratio of the solder resist strip separating the lead lands from the pad land.
2/16/2011 Rev2.3
19