LMH0002SQ/NOPB National Semiconductor, LMH0002SQ/NOPB Datasheet - Page 4

• Manufacturer Part Number: LMH0002SQ/NOPB
• Description: IC CABLE DVR SERIAL DGTL 16-LLP
• Manufacturer: National Semiconductor
• Type: Driverr

Specifications of LMH0002SQ/NOPB

• Applications: SMPTE 292M / 259 M
• Mounting Type: Surface Mount
• Package / Case: 16-WQFN Exposed Pad
• Operating Temperature (min): -40C
• Operating Temperature Classification: Industrial
• Operating Temperature (max): 85C
• Package Type: LLP EP
• Rad Hardened: No
• Device Type: Cable
• Ic Interface Type: SDI
• Supply Voltage Range: 3.135V To 3.465V
• Driver Case Style: LLP
• No. Of Pins: 16
• Operating Temperature Range: -40°C To +85°C
• Filter Terminals: SMD
• Rohs Compliant: Yes
• Data Rate Max: 1.485Gbps
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

www.national.com
Device Operation
INPUT INTERFACING
The LMH0002 accepts either differential or single-ended in-
put. The inputs are self-biased, allowing for simple AC or DC
coupling. DC-coupled inputs must be kept within the specified
common-mode range. SDI and SDI are self-biased at ap-
proximately 2.1V with V
ential input stage for SDI and SDI.
FIGURE 1. Differential Input Stage for SDI and SDI.
CC
= 3.3V. Figure 1 shows the differ-
20176104
4
OUTPUT INTERFACING
The LMH0002 uses current mode outputs. Single-ended out-
put levels are 800 mV
(with R
the R
The R
the R
the R
capacitance.
OUTPUT SLEW RATE CONTROL
The LMH0002 output rise and fall times are selectable for ei-
ther SMPTE 259M or SMPTE 292M compliance via the SD/
HD pin. For slower rise and fall times, or SMPTE 259M com-
pliance, SD/HD is set high. For faster rise and fall times, or
SMPTE 292M compliance, SD/HD is set low.
REPLACING THE GENNUM GS1528, GS1528A, and
GS1578A
The LMH0002MA is form-fit-function compatible with the
Gennum GS1528 and GS1528A. The LMH0002SQ is form-
fit-function compatible with the Gennum GS1578A.
REF
REF
REF
REF
REF
pin. In addition, the copper in the plane layers below
resistor connected between the R
network should be removed to minimize parasitic
resistor should be placed as close as possible to
= 750Ω). Output level is controlled by the value of
P-P
into 75Ω AC-coupled coaxial cable
REF
pin and V
CC
.