ATF4CL12 Amphenol PCD, ATF4CL12 Datasheet - Page 54

• Manufacturer Part Number: ATF4CL12
• Description: SHORT LINK COMB INSUL DIN 2POLE
• Manufacturer: Amphenol PCD
• Series: ATFr
• Type: Terminal Block, Cross Connectionr

Specifications of ATF4CL12

• Number Of Positions: 2
• Style: Flat Pins
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: ATF Series

ELL PLUGS & HEADERS
High Voltage 600V
.400"/10.0MM—ELL SERIES
The .400"/10.0mm ELL product line
is a double-spaced version of PCD’ s
broad family of .200"/5.0mm ELF
plugs and headers, offering a higher
voltage rating—600Vrms—and the
same range of configurations and
accessories as the ELF line shown on
pages 25 and 26.
Available Configurations
The plugs and headers available in
the ELL series are listed below right.
All are supplied in both .400" and
10.0mm spacing, in 2 through 12
positions. See the Par t Number Guide
on this page for ordering infor mation.
SPECIFICA TIONS:
Dielectric Withstanding: 3000V
Current Rating: 15A
Operating Voltage: 600V
Insulation Resistance: 10
Wire Pullout Force (Plug):
Per UL 486E, Section 14
MATERIALS:
Refer to corresponding ELF product pages.
HEADER INST ALLATION:
Hole Diameter: .055" min.
PLUG INST ALLATION
Wire Range: 12-26 AWG
Wire Strip Length: .310" (14-26 AWG),
.490" (12 AWG, ELLF only)
Recommended Tightening Torque:
7 lb-in. (0.79N-m)
APPROVALS:
Amphenol Pcd • 2 Technology Drive • Peabody, MA 01960 • www.amphenolpcd.com • 800.333.4723 • [e-mail]
5
Megohms
ELLH Pin Headers. Vertical and hori-
zontal orientation, closed and open
sides.
ELLP Plugs. Wire entry parallel to
board and contact.
ELLT Plugs. Top or bottom wire entr y
perpendicular to board and contact.
ELLF Plugs. Wire insertion and screw
actuation from the front of the block,
facilitating installation.
ELLK Plugs. 45° wire entry angle pro-
vides optimal installation and applica -
tion flexibility.
Options and Variations
The same options and variations
offered with the ELF ar e also available
in the ELL line:
• High-temperature SMT
• Choice of Black or Green
• Selective Gold Plating
• Mounting Ears
• Ejector Ear Headers
• Marking/Labels
Compatibility
.400" (10.16mm)
10.0mm (.394")
53