HR30-7J-10PC(71) Hirose Electric Co Ltd, HR30-7J-10PC(71) Datasheet - Page 11

• Manufacturer Part Number: HR30-7J-10PC(71)
• Description: CONN JACK 10POS MALE CRIMP
• Manufacturer: Hirose Electric Co Ltd
• Series: HR30r

Specifications of HR30-7J-10PC(71)

• Connector Type: Jack for Male Contacts
• Number Of Positions: 10
• Shell Size - Insert: 7
• Contact Type: Crimp
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Push-Pull
• Orientation: Keyed
• Shell Material, Finish: Polyphenylene Sulfide
• Ingress Protection: IP68 - Dust Tight, Waterproof
• Features: Strain Relief
• Note: Contacts Not Provided
• Product Type: Connectors
• Contact Style: Pin (Male)
• Shell Style: Jacks
• Number Of Contacts: 10
• Shell Size: 7
• Mounting Style: Cable
• Termination Style: Crimp
• Contact Plating: Gold
• Cable Diameter: 6.2 mm to 7 mm
• Current Rating: 2 A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Shell Size, Military: -
• Contact Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: *HR30-7J-10PC(71); HR595

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Note: Loctite is a registered trademark of the Henkel Loctite Corporation.
3
1. To prevent accidental loosening of the back shell it is recommended that a small amount of primer (Loctite® 7649) and
2. Keeping the terminated insulator body on the fixture, re-assembly the plug in order shown.
4. Using the correct back-tightening collar tighten the back shell to the specified torque.
5. Remove the assembly from the fixture.
adhesive (Loctite® 271) be applied to the threads of the insulator body before proceeding.
When tightening the collar make sure that the cable will NOT turn.
Connector
10 and 12 Pos.
3 and 6 Pos.
Back shell tightening collar size
16 mm
18 mm
Torque
11