2832632 Phoenix Contact, 2832632 Datasheet - Page 8

• Manufacturer Part Number: 2832632
• Description: ETHERNET SWITCH 8 PORT RJ45
• Manufacturer: Phoenix Contact
• Type: Ethernetr

Specifications of 2832632

• Features: 8 Ports
• Product: Switches
• Usoc Codes: RJ45
• Mounting Style: DIN Rail
• Number Of Ports: 8
• Gender: Female
• Shielding: Unshielded
• Contact Type: RJ45
• Number Of Rows: 2
• Operating Temperature Range: - 40 C to + 70 C
• Current, Consumption: 250 mA
• Phoenix Part Number: FL SWITCH LM 8TX
• Power Consumption: 6 W
• Voltage, Ripple: 3.6 Vpp
• Voltage, Supply: 24 VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: FL SWITCH LM 8TX

–
These indicators will always keep you informed about the LMS status. Local diagnostics without additional tools is possible
thanks to numerous LEDs.
–
Thanks to auto crossing of the transmit and receive cables of a twisted pair interface, it is no longer necessary to
differentiate between a 1:1 cable or a cross-over Ethernet cable.
–
Auto negotiation is a function whereby the switch automatically detects the operating parameters for the connected network
and sets the corresponding parameters (10 Mbps/100 Mbps data transmission rate and half/full duplex transmission mode)
for its RJ45 ports. Automatic port setting eliminates the need for manual intervention by the user. The auto negotiation
function can be activated/deactivated via the web interface.
–
The switch uses link test pulses according to standard IEEE 802.3 at regular intervals to monitor the connected TP/TX cable
segments for short circuits and interrupts.
Software Functions
SNMP
SNMP (Simple Network Management Protocol) enables Ethernet communication monitoring also via network management
systems. Management systems, such as a PC with Factory Manager, can read and modify configuration and diagnostic
data from network devices via SNMP. Supported MIBs: SNMP (MIB II, Bridge, IF MIB), Phoenix MIB, RSTP MIB.
IEEE 802.1w - Rapid Reconfiguration Spanning Tree Protocol (RSTP)
Rapid Spanning Tree is a procedure enabling the use of redundant Ethernet structures. Via RSTP, the meshed topologies
of the redundant structures are suppressed logically and acyclic converted to tree structures. In meshed networks, two
nodes may be connected in two or more ways (loop). Due to these loops, data packets would circle endlessly in the network.
For this reason these loops are replaced by a logical deterministic path using an RSTP algorithm. The loops are eliminated
by temporarily switching off the individual switch ports in a controlled way. All active ports as well as deactivated ports
receive data packets. However, the data packets are only forwarded by active ports. The deactivated ports operating in hot
standby mode are reintegrated into the network, if required, by modifying the network topology.
Web-Based Management
Apart from the management via SNMP, the switch also supports integrated web-based management. This enables detailed
ways for diagnostics and configuration during startup, operation and in the event of an error, as well as comprehensive
network and device information.
IGMP Snooping
In IGMP snooping, the switch passively listens in on the IGMP messages that are sent over the network and dynamically
creates the appropriate groups. The groups are not saved and will be lost on every power down or when switching off the
snooping function.
7199_en_01
Status and diagnostic indicators
Auto crossing
Auto negotiation
Twisted pair
By default upon delivery the IGMP Snooping function is activated for the „E“ versions. It can be activated in the
WBM for the other versions, if necessary.
PHOENIX CONTACT
FL SWITCH LM ...
8