AC-BP OK International, AC-BP Datasheet
AC-BP
Specifications of AC-BP
AC-BP Summary of contents
Page 1
METCAL MX-5000 Soldering, Desoldering and Rework System ...
Page 2
... Power. Precision. Performance. Today, the main challenges for hand soldering and rework are driven by three factors. First, the need for more heat with lead-free and high thermal demand boards. Second, the need for higher levels of precision with increasingly smaller components. And finally, the need for greater control with components and substrates that require limited exposure to high temperatures ...
Page 3
... This new workstand has an adjustable angle cradle that allows operators to select and lock the angle for tool placement in the holder to meet their preference. This can positively impact ergonomics and productivity. Systems Configurations ...
Page 4
... The MX-5020 includes the Metcal UltraFine UFTC cartridges, the hand-piece is a speciality tool for soldering and touch-up of very small components, restricted access or high density component packaging on a PCB. The new range of UFTC cartridges (see page 10) feature tip geometries of 0.2 mm (.0078") to 1.2 mm (.047"). With their relatively small geometries and low mass, as compared to the STTC Series, these are suited for low-mass or small part soldering ...
Page 5
... MX-W5CR Cradle for Metcal TipSaver AC-Y10 Accessory: yellow sponge, package of ten AC-BP Accessory: brass pad, package of ten Note: cartridges not included with hand-pieces Note: Users of the MX-500 System that have either an MX-RM3E Hand-piece or MX-TALON Tweezer-Action Hand-piece can still use these hand-pieces with the MX-5000 System. However, for improved operator comfort and ergonomics, the new Metcal Advanced Hand-piece (STTC and SMTC cartridges) and the MX-PTZ Precision Tweezers are highly recommended ...
Page 6
... Hand-piece Selection Guide The MX-5000 Series offers users a choice of hand-pieces to meet the customer’s application needs. Each hand-piece has its own range of cartridges with many choices available for tip geometry and temperature. Note: The MX-RM3E Rework Hand-piece and the MX-TALON Hand-piece from the MX-500 range are not recommended for use with the MX-5000 System, but they are available and compatible with the MX-5000 System ...
Page 7
... The following tips should be selected based on the work area to be soldered. Where possible the tip selected should deliver maximum contact to the work area and have as short a taper as possible for good thermal transfer. Long tapered and bent tips should only be selected where accessibility is limited. ...
Page 8
Cartridges for Metcal Advanced Chisel Cartridges STTC-x13 Cartridge, Chisel, 3mm (0.12"), 90° STTC-x99 Cartridge, Chisel, Bent, 1.5mm (0.06"), 30° STTC-x98 Cartridge, Chisel, Bent, 1.78mm (0.07"), 30° STTC-x17 Cartridge, Chisel, 5mm (0.2"), 30° STTC-x65 Cartridge, Chisel, Long, 5mm (0.2") STTC-x42 Cartridge, ...
Page 9
... Hoof Tip Cartridges With solder deposited on the face of the hoof tip, users can gently drag the tip across an array of leads resulting in fast and effectively formed solder connections. These geometries are ideal for multi-lead soldering of J-lead or gull wing components. Smaller diameter tips such as the SMTC-x167 allow for multi-lead soldering in confined spaces ...
Page 10
... The MX-PTZ Precision Tweezers Hand-piece provides an efficient and ergonomic resource to users for removal and replacement of chip and SOIC packages. Especially with larger tip geometries, where heat volume is required for an efficient process, the MX-5000 System offers exceptional speed and control over the rework process. ...
Page 11
... STDC-x06 Cartridge, Desolder STDC-x07 Cartridge, Desolder STDC-x03L Cartridge, Desolder Long Reach STDC-x04L Cartridge, Desolder Long Reach STDC-X05L Cartridge, Desolder Long Reach TM for use with the Metcal UltraFine Hand-piece (MX-H2-UF) ø (") ø (") 0.64mm (0.025") 1.40mm (.055") 0.76mm (0.076") 1.68mm (.066") 1.02mm (0.04" ...
Page 12
... Tel: +49 (0) 6146-83776-0 Fax: +44 (0) 23 8048 9109 Fax: +49 (0) 6146-83776-22 europe@okinternational.com d-info@okinternational.com BRO-MET 40°C 55°C 100 - 240 VAC, grounded circuit 50/60 Hz 125W 80 Watts max. Per channel at 22°C ambient temperature 13.56 MHz 183 cm (72") SJT 12.1 cm (4.8") x 13.0 cm (5.1") x 23.5 cm (9.3") cTUVus, CE < ...