HR30-8P-T02 Hirose Electric Co Ltd, HR30-8P-T02 Datasheet - Page 12

• Manufacturer Part Number: HR30-8P-T02
• Description: Crimping, Stripping, Cutting Tools & Drills TIGHTENING COLLAR 10P, 12P BACKSHELL
• Manufacturer: Hirose Electric Co Ltd
• Type: Tightening Collarr

Specifications of HR30-8P-T02

• Product: Tool Component
• Description/function: Tightens backshell to specified torque
• Fits Cable/wire: 26-30 AWG
• Wire Gauge Min (awg): 26
• Wire Gauge Range: 26-30
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 10P, 12P backshell

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
12
BGeneral usage notes
BPrecautions
When mounting, smooth mating will be achieved by holding plug
in any are “A” and aligning the arrow of the plug with that of the
receptacle ,then pushing the plug straight in.
1. Do NOT apply force in excess of 30N in the directions shown below.
2. To maintain the water/dust protection performance and the cable clamp force, use a cable that is within the range of applicable cable diameter.
3. Consult HRS representative when using different cables.
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
1. Mating
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: [phone], FAX: [phone]
http://www.hirose.com
http://www.hirose-connectors.com
When removing the plug from its connected condition, hold the
plug by push/pull locking collar (area “B”) and pull straight off.
2. Un-mating