832HT-3L MG Chemicals, 832HT-3L Datasheet - Page 5

• Manufacturer Part Number: 832HT-3L
• Description: Chemicals HI-TEMP EPOXY 3L POTTING COMPOUND
• Manufacturer: MG Chemicals
• Type: Potting Compoundr

Specifications of 832HT-3L

• Product: Epoxy Compounds
• Chemical Component: Epoxy Resin Type Bis-F/Phenol Novolac Type Epoxy Resin
• Primary Type: Adhesive
• Weight: 0.8 gal.
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Section 6: Accidental Release Measures
Spill Procedure:
Section 7: Handling and Storage
Handling:
Storage:
Section 8: Exposure Controls
Routes of entry:
Ventilation:
Personal
Protection:
Section 9: Physical and Chemical Properties
Section 10: Stability and Reactivity
Stability:
Conditions to avoid:
Incompatibilities:
Polymerization:
Decomposition:
Physical
Boiling
State:
Point:
Liquid
>150ºC
/302°F
Wash thoroughly after handling. Avoid contact with eyes, skin, and clothing. Do not ingest or inhale.
Do not expose container to heat.
Store in a cool, dry, well-ventilated area, away from incompatible substances.
Provide adequate ventilation. Wear appropriate personal protection. Sprinkle absorbent
compound onto spill, then sweep into a plastic or metal container. Wipe up further residue with
paper towel and place in container. Wash spill area with soap and water.
Eyes, ingestion, inhalation, and skin.
Use adequate general or local exhaust ventilation to keep airborne concentrations below
exposure limits.
Wear appropriate protective eyeglasses or chemical safety goggles. Wear appropriate protective
clothing to prevent skin contact. Wear chemical resistant gloves such as butyl rubber, nitrite, or
neoprene. Use a NIOSH approved respirator when necessary.
Gravity:
Specific
Odor:
Stable at normal temperatures and pressures.
Excessive temperatures.
Strong Acids, Amines, strong bases, and strong oxidizing agents.
May occur.
Carbon dioxide, and carbon monoxide, phenol compounds.
Mild
1.39
Pressure:
Solubility
in water:
PAGE 2 / 4
Vapor
Insoluble
<1 mm Hg @
20°C
Evaporation
MSDS Code: 832HT – Part A
Density:
Registered Quality System ISO 9001
Rate:
Vapor
Burlington, Ontario, Canada
N/E
N/A
QMI Certificate # 004008
pH: N/A