2510-P Techspray, 2510-P Datasheet - Page 3

• Manufacturer Part Number: 2510-P
• Description: Chemicals CONFORMAL COAT RMVR
• Manufacturer: Techspray
• Type: Conformal Coating Removerr

Specifications of 2510-P

• Product: Prototyping/Board Repair
• Size: 1 pint
• Container: Glass
• Chemical Component: Inhibited with Butlylated Hydroxy Toluene/Tetrahydrofuran
• Primary Type: Cleaner
• Special Features: Non-Corrosive
• Weight: 1 Pint
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5. FIRE FIGHTING MEASURES
6. ACCIDENTAL RELEASE MEASURES
Trace Technologies Conformal Coating Remover
SKIN: Immediately flush skin with plenty of water. Remove clothing. Get medical attention immediately. Wash
clothing separately before reuse.
INGESTION: If swallowed, gently wipe or rinse the inside of the mouth with water. DO NOT induce vomiting.
Sips of water may be given if person is fully conscious. Never give anything by mouth to an unconscious or
convulsing person. Immediately contact a poison control center, emergency room or physician as further treatment
may be necessary.
INHALATION: Remove to fresh air. If not breathing, give artificial respiration or give oxygen by trained
personnel. Seek immediate medical attention.
FLASHPOINT AND METHOD: -14.4°C (6°F)TAG CC
FLAMMABLE LIMITS: 2.0 to 11.8
GENERAL HAZARD: Flammable Liquid. Can release vapors that form explosive mixtures at temperatures at or
above the flash point.
EXTINGUISHING MEDIA: Water, foam, dry chemical, carbon dioxide.
HAZARDOUS COMBUSTION PRODUCTS: Smoke, fumes and oxides of carbon.
EXPLOSION HAZARDS: Vapors may form explosive mixture with air.
FIRE FIGHTING PROCEDURES: Use water spray to keep fire-exposed containers cool and to knock down
vapors which may result from product decomposition.
FIRE FIGHTING EQUIPMENT: As in any fire, wear self-contained breathing apparatus pressure-demand,
(MSHA/NIOSH approved or equivalent) and full protective gear.
HAZARDOUS DECOMPOSITION PRODUCTS: None Expected.
SMALL SPILL: Contain spill with dike to prevent entry into sewers.
LARGE SPILL: If this material is released into a work area, evacuate the area immediately.
GENERAL PROCEDURES: Dike area to contain spill. Take precautions as necessary to prevent contamination
of ground and surface waters. Recover spilled material on adsorbent, such as sawdust or vermiculite, and sweep into
closed containers for disposal. After all visible traces, including vapors, have been removed thoroughly wet vacuum
the area. Do not flush to sewer. If area of spill is porous, remove as much contaminated earth, gravel, etc. as
necessary and place in closed containers for disposal.
SPECIAL PROTECTIVE EQUIPMENT: Only personnel equipped with proper respiratory and skin/eye
protection should be permitted in area. See Section 8 for details.