QBE Chemtronics, QBE Datasheet - Page 2
Specifications of QBE
Product
Cleaners & Degreasers
Size
200 Wipes
Container
Box
Cleaner Type
Optical
Dispensing Method
Box
Primary Type
Wipe
Temperature, Autoignition
432 °C
Svhc
No SVHC (15-Dec-2010)
Accessory Type
Wipe
Length
7cm
Width
7.6cm
Colour
White
Pack Quantity
200
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
Cleaning Fiber Optic End-Faces
“Wet” Cleaning with the QbE
ith the QbE
For Splice Preparation
Buffer Gel Removal
1. Pull one QbE Wipe over the fiber-safe
2. Hold the end face at a 90 degree
3. Draw the end face lightly over the platen in a
4. Do not retrace your cleaning procedure in the
5. Do not use a figure-eight motion; do not use
6. Check your work with a fiber scope or
1. Lightly “spot” the QbE wipe on the platen
2. Draw the end-face from the solvent wetted
3. Check your work with a fiber scope or
1. Lightly moisten QbE wipe and gently
2. Lightly dampen a 38540ESD swab,
1. Pull three single QbE Wipers out of the
2. Spray a small amount of Electro-Wash
3. Pull the cable through the first wiper and
4. Repeat until the cable “squeaks” clean.
foam platen.
perpendicular to the platen.
smooth linear motion - do not press too hard.
same area.
a “twist & turn” motion.
measuring device.
with Electro-Wash
area to the dry area.
measuring device.
wipe away fiber contaminants.
remove soil from V-grooves on fusion
splicer.
container.
PX Fiber Optic Cleaner into the folded
wipers.
discard.
Buffer Gel Removal
PX Fiber Optic Cleaner.
MANUFACTURED BY:
ITW CHEMTRONICS
8125 Cobb Center Drive
Kennesaw, GA 30152
1-770-424-4888
NOTE: This information is believed to be
accurate. It is intended for professional end users
having the skills to evaluate and use the data
properly. ITW Chemtronics
the accuracy of the data and assumes no liability
in connection with damages incurred while using
it.
DISTRIBUTED BY:
REV. A (11/02)
®
®
does not guarantee