41650 MG Chemicals, 41650 Datasheet
41650
Manufacturer Part Number
41650
Description
Chemicals ELECTROPLATING Tank
Manufacturer
MG Chemicals
Type
Electroplating Tankr
Datasheet
1.41650.pdf
(2 pages)
Specifications of 41650
Description/function
Electroplating Tank
Product
Prototyping/Board Repair
Container
Box
Includes
3.3 gallon plastic tank with holes for bus bards, Tank lid, Two solid copper anode bus bars (3⁄8" × 10.5") with red wires and connector, One solid copper cathode bus bar ("3⁄8 × 10.5") with black wire and connector and 5" copper cathode hook
Special Features
Electroplating Tank
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Copper Electroplating
Copper Electroplating is the process in which a layer of copper is deposited on the item to be plated
by using an electric current. For the electronics industry, copper electroplating is commonly used to
plate through-holes or to strengthening existing copper traces or contacts.
The following products are required to copper electroplate:
Electroplating Tank
in the market.
Features:
Contents:
Use of this product requires
The following products are also required to plate copper using the MG Chemicals
system:
Copper Anode Set
bar anodes with hooks (6” x 3/8” anodes) designed for use with
MG Chemicals’ electroplating system. This should also be
•
•
•
•
•
•
•
•
•
•
•
•
•
* Gloves and anodes sold separately
A rectifier (capable of at least 3 amps, but no more then 25 amps)
A magnetic stirrer with 17 cm x 17 cm plate (recommended, but other agitation systems are possible)
Anodes (of the metal being plated)
Electroplating solution (suitable to the metal being plated)
Holds 2 gallons of plating solution
Open bus bars make it easy to hang anodes and cathode hook
Bus bars are removable for easy cleaning in between uses
Usable for prototyping pcb’s up to 4” x 6” in size
3.3 gallon plastic tank with holes for bus bards
Tank lid
Two solid copper anode bus bars (3/8” x 10.5”) with red wires
and connector
One solid copper cathode bus bar (3/8” x 10.5”) with black
wire and connector
5” copper cathode hook
(Cat. No.
(Cat. No.
41660): This is a set of 8 copper
41650): This placing tank will work with any electroplating system
41650 Summary of contents
Page 1
... The following products are also required to plate copper using the MG Chemicals system: Copper Anode Set (Cat. No. bar anodes with hooks (6” x 3/8” anodes) designed for use with MG Chemicals’ electroplating system. This should also be 41650): This placing tank will work with any electroplating system 41660): This is a set of 8 copper ...
Page 2
... Copper Electroplating Solution solution for copper electroplating. Most electroplating systems require the user to mix four or more chemicals to create a plating solution. Now, MG Chemicals makes electroplating easy with ready to use electroplating solutions. Available in 1 gallon sized containers. ...