2510-N Techspray, 2510-N Datasheet - Page 4

• Manufacturer Part Number: 2510-N
• Description: Chemicals CONF COAT RMVR PEN
• Manufacturer: Techspray
• Type: Conformal Coating Removerr

Specifications of 2510-N

• Product: Cleaners & Degreasers
• Size: 10 mL
• Container: Pen
• Chemical Component: Inhibited with Butlylated Hydroxy Toluene/Tetrahydrofuran
• Dispensing Method: Pen
• Primary Type: Cleaner
• Special Features: Non-Corrosive
• Weight: 10 ml
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

7. HANDLING AND STORAGE
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Chemical Name
Tetrahydrofuran
BHT
Trace Technologies Conformal Coating Remover
COMMENTS: Remove all sources of ignition. Use spark-proof tools.
GENERAL PROCEDURES: Wash thoroughly after handling. Use only in a well ventilated area. Store in a cool
dry place.
HANDLING: Ground and bond containers when transferring material.
STORAGE: Keep away from heat and flame.
STORAGE PRESSURE: Store at local atomspheric pressure.
STORAGE TEMPERATURE: Store in a cool place below ( 120 ) F (49 ) C.
EXPOSURE GUIDELINES:
ENGINEERING CONTROLS: Use process enclosures, local exhaust ventilation, or other engineering controls to
control airborne levels below recommended exposure limits.
PERSONAL PROTECTIVE EQUIPMENT
WORK HYGIENIC PRACTICES: Wash hands before eating and wash before reuse.
OTHER USE PRECAUTIONS: Emergency shower and eyewash facility should be in close proximity.
OSHA HAZARDOUS COMPONENTS (29 CFR 1910.1200)
OSHA TABLE COMMENTS:
1. NL = Not Listed
EYES AND FACE: Wear safety glasses with side shields (or goggles) and a face shield.
SKIN: The glove(s) listed below may provide protection against permeation. Gloves of other chemically
resistant materials may not provide adequate protection. Viton, Solvex, Butyl, Buna, Neoprene.
RESPIRATORY: A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 requirements
must be followed whenever workplace conditions warrant a respirator's use.
TWA
STEL
TWA
OSHA PEL
ppm
200
ppm
590
ppm
10 mg/
m3
[1]
mg/m
250 mg/
m3
735 mg/
m3
3
EXPOSURE LIMITS
ACGIH TLV
ppm
200
ppm
250
ppm
10 mg/
m3
mg/m
590 mg/
m3
737 mg/
m3
3
Supplier OEL
ppm
NL
ppm
NL
ppm
mg/m
NL mg/
m3
NL mg/
m3
3