1632-16S Techspray, 1632-16S Datasheet - Page 4

• Manufacturer Part Number: 1632-16S
• Description: Chemicals G3 Contact Cleaner, 16 oz aerosol
• Manufacturer: Techspray
• Type: Contactr

Specifications of 1632-16S

• Product: Cleaners & Degreasers
• Size: 16 oz
• Container: Aerosol
• Chemical Component: 1, 1, 1, 3, 3-Pentafluoropropane/1, 1, 1, 2-Tetraflouroethane (Propellant)/1, 2-Transdichloroethylene/Carbon Dioxide (Propellant)/Ethyl Hydroxy Propionate
• Dispensing Method: Aerosol
• Primary Type: Cleaner
• Special Features: Non-Flammable
• Weight: 16 Oz.
• Cleaner Type: Electrical / Electronic Component
• Cleaner Applications: Contacts
• Volume: 368ml
• Leaded Process Compatible: Yes
• Peak Reflow Compatible (260 C): Yes
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

8. EXPOSURE CONTROLS / PERSONAL PROTECTION
9. PHYSICAL AND CHEMICAL PROPERTIES
Chemical Name
1,2-transdichloroethylene (Trans)
1,1,1,3,3-Pentafluoropropane (HFC-245fa)
Ethyl Hydroxy Propionate
1,1,1,2-Tetrafluoroethane (HFC-134a)
Contact Cleaner G3®
EXPOSURE GUIDELINES:
ENGINEERING CONTROLS: Use process enclosures, local exhaust ventilation, or other engineering controls to
control airborne levels below recommended exposure limits.
PERSONAL PROTECTIVE EQUIPMENT
OTHER USE PRECAUTIONS: Emergency shower and eyewash facility should be in close proximity.
ODOR: Faint ethereal odor
APPEARANCE: Clear, Colorless liquid
PERCENT VOLATILE: 100
OSHA HAZARDOUS COMPONENTS (29 CFR 1910.1200)
OSHA TABLE COMMENTS:
1. NOT ESTABLISHED
2. NA=NOT APPLICABLE
3. NOT APPLICABLE
4. * (AEL)=Acceptable Exposure Limit as established by the manufacture
EYES AND FACE: For normal conditions, wear safety glasses. Where there is reasonable probability of liquid
contact, wear splash-proof goggles.
SKIN: The glove(s) listed below may provide protection against permeation. Gloves of other chemically
resistant materials may not provide adequate protection. Viton, Solvex, Butyl, Buna, Neoprene.
RESPIRATORY: A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 requirements
must be followed whenever workplace conditions warrant a respirator's use.
TWA NE
STEL NE
TWA NONE
STEL NONE
TWA
STEL
TWA NE
OSHA PEL
ppm
[2]
[3]
[1]
mg/m
3
EXPOSURE LIMITS
ACGIH TLV
ppm
200
ppm
200
ppm
NONE
NONE
NE
mg/m
3
Supplier OEL
ppm
NE
300
ppm
1,000
ppm
[4]
mg/m
3