BDJ0700HFV-TR Rohm Semiconductor, BDJ0700HFV-TR Datasheet - Page 8

• Manufacturer Part Number: BDJ0700HFV-TR
• Description: Board Mount Temperature Sensors Temperature Sensor 70C
• Manufacturer: Rohm Semiconductor

Specifications of BDJ0700HFV-TR

• Temperature Threshold: + 70 C
• Full Temp Accuracy: + 2.5 C
• Package / Case: HVSOF-5
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.4 V
• Maximum Operating Temperature: + 100 C
• Minimum Operating Temperature: - 30 C
• Supply Current: 7.5 uA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

●Notes for use
1) Absolute Maximum Ratings
2) GND voltage
3) Pin short and mistake fitting
4) Operation in strong electric field
5) Mutual impedance
© 2009 ROHM Co., Ltd. All rights reserved.
BDJ□□□0HFV Series
www.rohm.com
An excess in the absolute maximum ratings, such as supply voltage, temperature range of operating conditions, etc., can
break down devices, thus making impossible to identify breaking mode such as a short circuit or an open circuit. If any
special mode exceeding the absolute maximum ratings is assumed, consideration should be given to take physical safety
measures including the use of fuses, etc.
Make setting of the potential of the GND terminal so that it will be maintained at the minimum in any operating state.
When mounting the IC on the PCB, pay attention to the orientation of the IC. If there is a placement mistake, the IC may be
burned up.
Be noted that using ICs in the strong electric field can malfunction them.
Use short and wide wiring tracks for the power supply and ground to keep the mutual impedance
as small as possible. Use a capacitor to keep ripple to a minimum.
8/9
Technical Note
2009.08 - Rev.A