BU52011HFV-TR Rohm Semiconductor, BU52011HFV-TR Datasheet - Page 18

• Manufacturer Part Number: BU52011HFV-TR
• Description: Industrial Hall Effect / Magnetic Sensors ULTRA SMALL DETECT SENSOR; 1.65-3.3V
• Manufacturer: Rohm Semiconductor
• Series: -r
• Type: Omnipolar Switchr

Specifications of BU52011HFV-TR

• Operational Type: Bipolar
• Operating Supply Voltage: 1.8 V or 2.5 V
• Current Rating: 5 uA
• Operating Point Min/max: - 5 mT to 5 mT
• Mounting Style: SMD/SMT
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Maximum Output Current: 0.5 mA
• Package / Case: HVSOF
• Hall Effect Type: Bipolar
• Output Current: 500µA
• Power Dissipation Pd: 536mW
• Sensor Case Style: HVSOF
• No. Of Pins: 5
• Supply Voltage Range: 1.65V To 3.3V
• Operating Temperature Range: -40°C To +85°C
• Svhc: No SVHC
• Sensing Range: ±5mT Trip, ±0.6mT Release
• Voltage - Supply: 1.65 V ~ 3.3 V
• Current - Supply: 8µA
• Current - Output (max): ±0.5mA
• Output Type: Digital, Open Collector
• Features: -
• Operating Temperature: -40°C ~ 85°C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

7) Operation in strong electromagnetic fields
8) Common impedance
9) GND wiring pattern
10) Exposure to strong light
11) Power source design
●Product Designations (Selecting a model name when ordering)
VCSP50L1
Since the IC performs intermittent operation, it has peak current when it’s ON. Please taking that into account and under
examine adequate evaluations when designing the power source.
Exercise extreme caution about using the device in the presence of a strong electromagnetic field, as such use may cause
the IC to malfunction.
Make sure that the power supply and GND wiring limits common impedance to the extent possible by, for example,
employing short, thick supply and ground lines. Also, take measures to minimize ripple such as using an inductor or
capacitor.
When both a small-signal GND and high-current GND are provided, single-point grounding at the reference point of the set
PCB is recommended, in order to separate the small-signal and high-current patterns, and to ensure that voltage changes
due to the wiring resistance and high current do not cause any voltage fluctuation in the small-signal GND. In the same way,
care must also be taken to avoid wiring pattern fluctuations in the GND wiring pattern of external components.
Exposure to halogen lamps, UV and other strong light sources may cause the IC to malfunction. If the IC is subject to such
exposure, provide a shield or take other measures to protect it from the light. In testing, exposure to white LED and
fluorescent light sources was shown to have no significant effect on the IC.
<Dimensions>
ROHM model
B
U
4-φ0.25±0.05
1PIN MARK
0.05
0.30±0.1
5
A
B
Part number
B
A
2
1.10±0.1
1
2
0.08
A
0.50
0
S
0
B
(Unit: mm)
1
S
VSCP50L1
SSON004X1216
HVSOF5
SSOP5
Package type
G
<
Tape/Reel Info
Tape
Quantity
Direction
of feed
U
18/20
L
1234
: GUL
: NVX
: HFV
: G
(Correct direction: With reel in the left hand, the 1pin of the product should be
at the upper left. Pull tape out with the right hand)
Reel
E2
Embossed carrier tape
3000pcs
>
1234
※Orders are available in complete units only.
E2 = Reel-wound embossed taping
E
VSCP50L1
SSON004X1216
HVSOF5
SSOP5
2
1pin
1234
1234
: E2
: TR
: TR
: TR
Direction of feed
1234