914CE2-9 Honeywell, 914CE2-9 Datasheet - Page 128

• Manufacturer Part Number: 914CE2-9
• Description: Basic / Snap Action / Limit Switches 1NC/1NO 9' cable SPDT
• Manufacturer: Honeywell
• Type: Limitr

Specifications of 914CE2-9

• Contact Form: SPDT - 1 NC / 1 NO
• Contact Rating: 5 Amps
• Actuator: Plunger, Roller
• Ingress Protection: IP66 / IP67 / IP68
• Operating Force: 11.8 N
• Termination Style: Wire
• Actuator Type: Roller Plunger
• Body Style: Miniature
• Current, Rating: 5 A
• Ip Rating: IP68
• Mounting Hole Size: 0.2 "
• Number Of Poles: 1
• Number Of Positions: 2
• Temperature, Operating: 0 to +70 °C
• Termination: Cable
• Voltage, Rating: 240 VAC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

ULTRASONIC DISTANCE SENSORS
Accessories (continued)
Programming
OPTIONS
Software
The software package 55195101-101 contains
software for programming 942 series separate
and 55195101-102 for the 942 series compact .
The software runs under Microsoft Windows™
versions 95™ and later.
Both packages contain an RS-232 cable (crossed)
with 2 Sub-D 9 pin connectors, to connect to a PC.
For 55195101-101 (942 Series separate), the
other end of the cable connects to the control box
942-M0A.... by screw terminals. For 55195101-
102 (942 Series compact), the other end of the
cable connects to programming module
55000005-002.
For sensor series 942T... the programming cable
gives easy access to the RS232 interface. The
RS232 interface of the connector is directly
connected to the Sub-D 9 pin connector, which
allows easy connection to a PC. The Windows™
based software is easy to use and is supplied on a
floppy disc with the programming cable.
942-A Series Separate
942-N Series Compact
942-T Series
(includes programming cable)
126
REFERENCE
55195101-101
55195101-102
55000018-001
Programming adaptor for 946
Series
Use with Series:
Sealing:
Number of pins:
REFERENCE
40779
www.honeywell.com/sensing
IP65
946
4
942 Series Compact programming
module
The 55000005-002 is a programming module for
the 942-A4N series. Although this device is not
necessary to setup the sensor, it is very useful as
it provides quick connections for the RS-232 data
link and the ‘hold’ switch.
It features 1 connector din Sub-D 9 pin,
compatible with the cable included in the software
package 55195101-102, 1 microswitch to put the
sensor in ‘hold’ mode (necessary for the RS-232
link), 1 female and 1 male connector to be inserted
between the customer’s interface and the 942-A4N
sensor.
The 55000005-002 may be used to programme
any number of sensors and is not necessary in the
usual run of the application. It is not compatible
with 942 separate series.
REFERENCE
55000005-002