BS-21-6 3M, BS-21-6 Datasheet - Page 2

• Manufacturer Part Number: BS-21-6
• Description: Terminals FLG FORK 22-18 AWG 6
• Manufacturer: 3M

Specifications of BS-21-6

• Wire Size (awg): 22-18
• Stud / Tab Size: # 6
• Insulation: Not Insulated
• Gender: Male
• Termination Style: Solder Lug
• Length: 1.02 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 5400728191

2
Glossary of Product Terminology
Adapters - To interconnect two connectors already attached
to wires.
Block Fork - Designed to use in terminal block because
sides lie flat against barrier portion of terminal block.
Bullet Style - Similar advantages as disconnects but are
rounded. Gives reliable in-line connection because parts
are made to have holding friction when joined. Usually
for automotive use.
Butt - Uses chamfered barrel ends to provide fast, easy wire
insertion from both ends and a built-in wire stop for correct
positioning. Must be crimped at both ends.
Closed-End - Used in situations requiring pigtail of two
or more wires.
Flanged Fork - Gives the benefit of both the block and
locking forks. Stays secure should screw loosen. Has
tipped-up ends.
Fork - Allows rapid connection of wire. Usually used
on free-standing studs.
Heavy-Duty - Products of heavier than normal gauge
material. Commonly used by railroads.
Hook - Combines the security of the ring with the
convenience of the forks.
Locking Fork - The spring-like tongue locks in place
around the stud even when mount screw is not tightened.
Extra force is required to remove from stud.
Parallel - Similar to butt with overlapped wires and single
crimp in center of connector. Used where space is limited.
Pins - For installation in compression blocks. Used in
Europe for terminating stranded wire.
Quick Connect (Disconnect) - Attached to mating part
by tongue of female part slipping over male tab. Use of
dents and rolled edges on female part provides excellent
holding force, while allowing easy and quick disconnect.
They are flat.
Ring - The standard style of tongue; the safest and
most reliable. It cannot be removed unless mounting
screw is removed.
Tab - Uses mounting hole for rivet or screw.
Tap - No wire stripping is necessary; just lay wire
in connector and crimp. Connection is made.