ABF.00.250.NTA LEMO, ABF.00.250.NTA Datasheet - Page 61
![RF Connectors ADAPT-BNC(UG88U)COAX](/photos/17/7/170737/abf_sml.jpg)
ABF.00.250.NTA
Manufacturer Part Number
ABF.00.250.NTA
Description
RF Connectors ADAPT-BNC(UG88U)COAX
Manufacturer
LEMO
Datasheet
1.GCA.00.255.LT.pdf
(64 pages)
Specifications of ABF.00.250.NTA
Body Style
Adapter
Connector Type
Adapter
Features
IP rating 50
Housing Material
Brass
Length
11.5 mm
Mounting Angle
Straight
Operating Temperature Range
- 55 C to + 260 C
Rf Series
Between Series
Product
Adapters
Gender
Male
Polarity
Normal
Shell Plating
Nickel
Impedance
50 Ohms
Termination Style
Quick Connect
Convert From
LEMO Plug
Convert To
BNC Receptacle
Side 1 Rf Series
Lemo 00
Side 2 Rf Series
BNC
Side 2 Gender
Jack (Female)
Adapter Style
Straight
Body Material
Brass
Side 1 Gender
Jack (Female)
Side 1 Polarity
Normal
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
PLEASE READ AND FOLLOW ALL INSTUCTIONS CAREFULLY AND CONSULT ALL RELEVENT NATIONAL AND
INTERNATIONAL SAFETY REGULATIONS FOR YOUR APPLICATION.
IMPROPER HANDLING, CABLE ASSEMBLY, OR WRONG USE OF CONNECTORS CAN RESULT IN HAZARDOUS
SITUATIONS.
1. SHOCK AND FIRE HAZARD
2. HANDLING
3. USE
4. TEST AND OPERATING VOLTAGES
5. CE MARKING
6. PRODUCT IMPROVEMENTS
www.lemo.com
Incorrect wiring, the use of damaged components, presence of foreign objects (such as metal debris), and / or residue
(such as cleaning fluids), can result in short circuits, overheating, and / or risk of electric shock.
Mated components should never be disconnected while live as this may result in an exposed electric arc and local
overheating, resulting in possible damage to components.
Connectors and their components should be visually inspected for damage prior to installation and assembly. Suspect
components should be rejected or returned to the factory for verification.
Connector assembly and installation should only be carried out by properly trained personnel. Proper tools must be
used during installation and / or assembly in order to obtain safe and reliable performance.
Connectors with exposed contacts should never be live (or on the current supply side of a circuit). Under general
conditions voltages above 30 VAC and 42 VDC are considered hazardous and proper measures should be taken to
eliminate all risk of transmission of such voltages to any exposed metal part of the connector.
The maximum admissible operating voltage depends upon the national or international standards in force for the
application in question. Air and creepage distances impact the operating voltage; reference values are indicated in the
catalog however these may be influenced by PC board design and / or wiring harnesses.
The test voltage indicated in the catalog is 75% of the mean breakdown voltage; the test is applied at 500 V/s and the
test duration is 1 minute.
CE Marking is applied to a complete product or device, and implies that the device complies with one or several
European safety directives.
CE Marking can not be applied to electromechanical components such as connectors.
The LEMO Group reserves the right to modify and improve to our products or specifications without providing prior
notification.
Product safety notice
®
59
®