DLW31SN222SQ2L Murata, DLW31SN222SQ2L Datasheet - Page 2

• Manufacturer Part Number: DLW31SN222SQ2L
• Description: Common Mode Inductors DC COMMON MODE CHOKE
• Manufacturer: Murata
• Series: DLW31Sr
• Type: Common Mode Choker

Specifications of DLW31SN222SQ2L

• Product: Chokes
• Shielding: Unshielded
• Tolerance: 25 %
• Maximum Dc Current: 200 mAmps
• Maximum Dc Resistance: 1.2 Ohms
• Operating Temperature Range: - 40 C to + 85 C
• Termination Style: SMD/SMT
• Package / Case: 1206 (3216 metric)
• Inductance: Not RequireduH
• Technology: Wirewound
• Impedance: 2.2kohm
• Tolerance (+ Or -): 25%
• Dc Resistance: 1.2Ohm
• Case Size (inches): 1206in
• Operating Temp Range: -40C to 85C
• Test Frequency: 100MHz
• Dc Current: 200mA
• Product Diameter (mm): Not Requiredmm
• Product Height (mm): 2.1mm
• Product Depth (mm): 1.8mm
• Product Length (mm): 3.4mm
• Military Standard: Not Required
• Failure Rate: Not Required
• Dc Resistance Max: 1.2ohm
• Dc Current Rating: 200mA
• Inductor Case Style: 1206
• No. Of Pins: 4
• Svhc: No SVHC (15-Dec-2010)
• Dc Current Max: 200mA
• Resistance: 1.2ohm
• Rohs Compliant: Yes
• Impedance @ 100mhz Typ: 2200ohm
• Self Resonant Frequency: 100MHz
• Impedance Typ: 2.2kohm
• Insulation Resistance: 10Mohm
• Voltage Rating Vdc: 50V
• Dielectric Withstand Voltage: 125V
• Termination Type: SMD
• Filter Terminals: SMD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

I !Caution/Notice
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
o
!Caution (Rating)
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
This data sheet is applied for CHIP COMMON MODE CHOKE COIL used for General Electronics equipment for your design.
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance.
Noise Suppression Products/EMI Suppression Filters > Common Mode Choke Coil > Wire Wound Type
http://www.murata.com/
Data Sheet
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
2011.1.13
2