B5812-U2 Antenova, B5812-U2 Datasheet - Page 9
![Antennas Reference Board for Flavus GSM Antenna](/photos/16/26/162604/b5812u1_sml.jpg)
B5812-U2
Manufacturer Part Number
B5812-U2
Description
Antennas Reference Board for Flavus GSM Antenna
Manufacturer
Antenova
Datasheet
1.B5812-U2.pdf
(13 pages)
Specifications of B5812-U2
Frequency Range
880 MHz to 960MHz, 1710 MHz to 1990 MHz
Vswr
5.9:1
Technology Type
Reference Board for Internal Snap In Antenna
Frequency
880 MHz to 960 MHz, 1710 MHz to 1990 MHz
Gain
1.4 dBi
Termination Style
SMA
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
10-3 Antenna placement
Flavus must be fitted to the device so that power from the antenna can radiate into free space.
Antenova recommends fitting the antenna close to the corner of the PCB with few components
or metal objects nearby. Ground can be placed at the side of the antenna closest to the feed,
but the remaining space around the antenna, including directly above and below should be free
from components or conducting objects.
Two recommended configurations are shown below, but other layouts are possible.
10-4 Space saving configuration
Integrated Antenna and RF Solutions
Where board space is limited, Flavus can be positioned closer to the main PCB ground plane
as shown below. In this position good results can be achieved in up to three bands as shown
in the performance table.
Please contact info@antenova for technical advice on getting the best results from Flavus into
your product.
Recommended PCB layouts: antenna mounted straight (left) and at 45 degrees (right).
Peak gain
Average gain
Average efficiency
Maximum Return Loss
Maximum VSWR
Space Saving Performance
performance
Typical
-3.5dBi
-3.0dB
1.4dBi
5.9:1
Flavus GSM Snap-In Antenna
45%
Space Saving Layout
880MHz-960MHz and
1710MHz-1990MHz
Part No. B5812-xx
Data given for the
frequency ranges
Conditions
Product Specification AE020033-H
9