B72510S2170K062 EPCOS Inc, B72510S2170K062 Datasheet - Page 63

• Manufacturer Part Number: B72510S2170K062
• Description: Varistors Varistor CT0805K17AUTOLCG
• Manufacturer: EPCOS Inc

Specifications of B72510S2170K062

• Voltage Rating Dc: 22 V
• Voltage Rating Ac: 17 V
• Clamping Voltage: 50 V
• Peak Surge Current: 30 Amps
• Surge Energy Rating: 100 mJ
• Capacitance: 1001 pF
• Operating Temperature Range: - 55 C to + 125 C
• Mounting: SMD/SMT
• Dimensions: 1.25 mm W x 2 mm L x 1.4 mm H
• Package / Case: 0805 (2012 metric)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

A further advantage of adhesion is that the components are subjected to virtually no temperature
shock at all. The curing temperatures of the adhesives are between 120 C and 180 C, typical
curing times are between 30 minutes and one hour.
The bending strength of glued chips is, in comparison with that of soldered chips, higher by a fac-
tor of at least 2, as is to be expected due to the elasticity of the glued joints.
The lower conductivity of conductive adhesive may lead to higher contact resistance and thus re-
sult in electrical data different to those of soldered components. Users must pay special attention
to this in RF applications.
6
Test
Wettability
Leaching
resistance
Thermal shock
(solder shock)
Tests of resistance
to soldering heat
for SMDs
Tests of resistance
to soldering heat
for radial leaded
components
(SHCV)
Please read Cautions and warnings and
Important notes at the end of this document.
Multilayer varistors (MLVs)
Automotive series
Solderability tests
Standard
IEC
60068-2-58
IEC
60068-2-58
IEC
60068-2-58
IEC
60068-2-20
Test conditions
Sn-Pb soldering
Immersion in
60/40 SnPb solder
using non-activated
flux at 215
for 3
Immersion in
60/40 SnPb
solder using
mildly activated flux
without preheating
at 260
for 10 1 s
Dip soldering at
300 C/5 s
Immersion in
60/40 SnPb for 10 s
at 260 C
Immersion
of leads in
60/40 SnPb
for 10 s at 260 C
0.3 s
5 C
Page 63 of 72
3 C
Test conditions
Pb-free soldering
Immersion in
Sn96.5Ag3.0Cu0.5
solder using non- or
low activated flux
at 245
for 3
Immersion in
Sn96.5Ag3.0Cu0.5
solder using non- or
low activated flux
without preheating
at 255
for 10 1 s
Dip soldering at
300 C/5 s
Immersion in
Sn96.5Ag3.0Cu0.5
for 10 s at 260 C
Immersion
of leads in
Sn96.5Ag3.0Cu0.5
for 10 s at 260 C
0.3 s
5 C
5 C
Criteria/ test results
Covering of 95% of
end termination,
checked by visual
inspection
No leaching of
contacts
No deterioration of
electrical parameters.
Capacitance change:
Change of varistor
voltage:
Change of varistor
voltage:
Change of
capacitance X7R:
15%
5%
5/+10%
5%