AP-CF016GA5GS-NR Apacer, AP-CF016GA5GS-NR Datasheet - Page 33

• Manufacturer Part Number: AP-CF016GA5GS-NR
• Description: Memory Modules CF4 16GB
• Manufacturer: Apacer

Specifications of AP-CF016GA5GS-NR

• Product: Flash
• Operating Supply Voltage: 3.3 V, 5 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Memory Size: 16 GB
• Memory Type: Compact Flash Controller
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

This command requests transfer of a single sector of data from the host. Table 6-7 defines the content of
this sector of information. If the identifier bit is set to Master and the device is in high security level, then
the password supplied shall be compared with the stored Master password. If the device is in the
maximum security level, then the unlock command shall be rejected. If the identifier bit is set to user, then
the device compares the supplied password with the stored User password. If the password compare fails
then the device returns command aborted to the host and decrements the unlock counter. This counter is
initially set to five and is decremented for each password mismatch when Security-Unlock is issued and
the device is locked. Once this counter reaches zero, the Security-Unlock and Security-Erase-Unit
commands are command aborted until after a power-on reset or a hardware reset is received. Security-
Unlock commands issued when the device is unlocked have no effect on the unlock counter.
6.1.29 Seek – 7XH
This command is effectively a NOP command to the Device although it does perform a range check of
cylinder and head or LBA address and returns an error if the address is out of range.
6.1.30 Set-Features – EFH
This command is used by the host to establish or select certain features. Table 6-8 defines all features
that are supported.
© 2009 Apacer Technology Inc.
Feature
01H
02H
03H
09H
55H
66H
69H
81H
Command (7)
Command (7)
Sec Num (3)
Sec Num (3)
Cyl High (5)
Cyl High (5)
Cyl Low (4)
Cyl Low (4)
Sec Cnt (2)
Sec Cnt (2)
Feature (1)
Feature (1)
C/D/H (6)
C/D/H (6)
Bit ->
Bit ->
Operation
Enable 8-bit data transfers.
Enable Write cache
Set transfer mode based on value in Sector Count register. Table 4-9 defines the values.
Enable Extended Power Operations
Disable Read Look Ahead.
Disable Power- on Reset (POR) establishment of defaults at software Reset.
NOP - Accepted for backward compatibility.
Disable 8-bit data transfer.
7
7
X
Compact Flash 4 series
AP-CFxxxxA5XS-XXXXXX
Table 6-8: Features supported (1/2)
6
6
LBA
X
5
5
X
32
Cylinder High (LBA 23-16)
Cylinder Low (LBA 15-8)
Drive
Drive
4
4
X (LBA 7-0)
Feature
Config
7XH
EFH
X
X
X
X
X
3
3
Head (LBA 27-24)
2
2
X
1
1
Rev. 1.0
0
0