MAX9635EVKIT+ Maxim Integrated Products, MAX9635EVKIT+ Datasheet - Page 5

• Manufacturer Part Number: MAX9635EVKIT+
• Description: Optical Sensor Development Tools SENSR INTRFCE W/DIFF INPUT
• Manufacturer: Maxim Integrated Products

Specifications of MAX9635EVKIT+

• Operating Voltage: 1.7 V to 3.6 V
• Operating Current: 0.65 uA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Description/function: Evaluation Kit
• Interface Type: USB, I2C
• Software: Software Included
• For Use With/related Products: MAX9635
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Figure 2. MAX9635 Interface Diagnostic Window
The MAX9635 EV kit features an on-board I
interface control through the USB. To use the EV kit with
a user-supplied I
on jumpers JU1 and JU2 to the 2-3 position. Then con-
nect the SDA and SCL signals to the corresponding
SDA and SCL pads on the EV kit board. Table 1 lists the
selectable jumper options.
The EV kit features an on-board hardware-interrupt
control. To use the EV kit with a user-supplied interrupt
interface, move the shunt on jumper JU3 to the 2-3
position. Then, connect the INT signal to the INT pad
on the EV kit board. Table 2 lists the selectable jumper
options.
Detailed Description of Hardware
_______________________________________________________________________________________
2
C/SMBus interface, move the shunts
Hardware Interrupt
I
2
C Bus Lines
2
C/SMBus
MAX9635 Evaluation Kit
The device can operate from a single-supply VCC
between 1.7V and 3.6V. Using the 3-pin jumper JU4,
the device can be powered either by the on-board 3.3V
power supply (default shunt position across pins 2-3)
or by an external power supply (shunt across pins 1-2).
Table 3 lists the selectable jumper options.
The EV kit provides 2-pin jumper JU5 to configure the
state of the A0 address pin. Table 4 lists the selectable
jumper options.
Bit 0 of I
Power Input
2
C Address
5