PIXIE-PXMS-DIL Flexipanel, PIXIE-PXMS-DIL Datasheet - Page 27

• Manufacturer Part Number: PIXIE-PXMS-DIL
• Description: Zigbee / 802.15.4 Modules & Development Tools PixieMAC Sleepy End Device DIL
• Manufacturer: Flexipanel

Specifications of PIXIE-PXMS-DIL

• Wireless Frequency: 2.4 GHz to 2.5 GHz
• Modulation: DSSS OQPSK
• Output Power: 1 mW
• Antenna: G-Antenna
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

MLME-SYNC-LOSS.indication (MSLI)
MSLI indicates loss of synchronization with a coordinator. The command relates to beacon networks
and is currently not supported.
MLME-POLL.request (MPLR)
MPLR requests data from the coordinator. These must be sent regularly by sleepy end devices in order
to retrieve data that is being cached for them by a coordinator.
Note that the source address mode for the data request must match the addressing mode of the message
being sent; the source address mode will be long if the short address is 0xFFFF or 0xFFFE, or short
otherwise. An +MPLC confirmation will only be issued when no further data is pending; otherwise, the
response will be an +MDAI data indication.
Command format
Filler1
SecurityEnable
Filler2
CoordAddrMode
Filler3
DstAddr
DstPanId
MLME-POLL.confirm (MPLC)
MPLC confirms a request for data from the coordinator. If data is available, the response will be an
MDAI data indication rather than an MPLC poll confirm.
Command format
status
Page 27
14-Jan-08
PixieMAC DS502-2
1 byte
5 bytes
8 bytes
8 bytes
2 bytes
1 byte
1 byte
1 byte
+MCPL={1 byte}
Result as enumeration. (Usually 0xEB = no more data)
+MPLR={26 bytes}
(fill with 00)
Security enabled
(fill with 00)
Coordinator addressing mode (0x02 = short, 0x03 = long)
(fill with 00)
Coordinator address. (If DstAddrMode specifies short
addresses, ignore last 6 bytes.)
Coordinator PAN ID
FlexiPanel Ltd
Patents may apply and/or pending
IEEE 802.15.4 section 7.1.16.1
IEEE 802.15.4 section 7.1.16.2
www.FlexiPanel.com