II-EVB-361MW-EU-220 Connect One, II-EVB-361MW-EU-220 Datasheet - Page 13

• Manufacturer Part Number: II-EVB-361MW-EU-220
• Description: WiFi / 802.11 Modules & Development Tools Eval board for Sec Socket iWiFi MS EU
• Manufacturer: Connect One

Specifications of II-EVB-361MW-EU-220

• Interface Type: RS-232
• Security: WPA, TKIP, AES-CCM, WEP 64,128 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

[0..3600]. When WLPS is set to 0, the Marvell chipset Power Save is disabled, even if
iChip enters Power Save mode.
WLPP (Factory Default: Empty)
This parameter sets the wireless LAN WPA1-PSK pass-phrase to be used in
generating the WPA1-PSK encryption key. When empty, WPA security is disabled. If
WLSI (SSID) is not empty, WPA1-PSK security is enabled for WiFi connections and
WLPP is used in generating the WPA1-PSK encryption key. The allowed value for
WLPP is an ASCII string containing 8-63 characters.
WLRS (Factory Default: 0)
This parameter sets the interval between consecutive scans that iChip performs in
search for nearby ad-hoc networks. Scan duration is two beacon periods (200 ms).
WLRS may be set in the range: 0-65535 milliseconds.
Wireless LAN Configuration Web Site Page
iChip’s configuration website includes two views that support configuration and
status retrieval of related Wireless LAN parameters. The configuration view displays
the configurable Wireless LAN AT+i parameters (WLCH, WLSI, WLWM, and
WLKI). New values may be defined and submitted to iChip from the browser.
Figure 1: Wireless LAN Web Configuration
Wireless LAN Status Report
The Wireless LAN AT+i Report (AT+iRP10) returns pertinent status information
regarding the active 802.11b/g Wireless LAN link. In response to issuing the report
command, iChip will reply with the following syntax:
II-EVB-361-MW User’s Manual
Where,
I/(<port stat>, <xfer rate>, <sig level>, <lnk qual>)
port stat
xfer rate
--
--
Port Status:
Transfer Rate, in the range 1..4
(
1 =>1 Mbps; 2 =>2 Mbps; 3 =>5.5 Mbps; 4 =>11 Mbps
0: Wireless LAN adapter not present
1: Wireless LAN adapter Disabled
2: Searching for initial connection
4: Connected
5: Out of range
)
13