450-0037 LS Research, 450-0037 Datasheet - Page 17

• Manufacturer Part Number: 450-0037
• Description: WiFi / 802.11 Modules & Development Tools TiWi01-R2 Module with U.FL Connector
• Manufacturer: LS Research

Specifications of 450-0037

• Wireless Frequency: 2412 MHz to 2472 MHz
• Interface Type: SDIO
• Board Size: 18 mm x 13 mm x 1.9 mm
• Operating Voltage: 5.5 V
• Antenna: Dipole, U.FL
• Operating Temperature Range: - 40 C to + 85 C
• For Use With/related Products: TiWi-R2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

BLUETOOTH POWER-UP SEQUENCE
The information in this document is subject to change without notice.
Confirm the data is current by downloading the latest revision from www.lsr.com.
330-0045-R3.7
The following sequence describes device power up from shutdown. Only the BT core is enabled; the
WLAN core is disabled.
Power up requirements:
1. No signals are allowed on the IO pins if no IO power supplied, because the IOs are not 'failsafe'.
Exceptions are CLK_REQ_OUT, SLOWCLK, XTALP and AUD_xxx, which are failsafe and can tolerate
external voltages with no VDDS and DC2DC.
2. VDDS and SLOWCLK must be stable before releasing BT_EN.
3. Fast clock must be stable maximum 55 ms after BT_EN goes HIGH.
Copyright © 2010-2011 LS Research, LLC
Figure 4-3. BT Power-up Sequence
TiWi-R2 TRANSCEIVER MODULE
DATASHEET
Page 17 of 30