AH101-PCB TriQuint, AH101-PCB Datasheet - Page 5

• Manufacturer Part Number: AH101-PCB
• Description: RF Modules & Development Tools 50-1500MHz Eval Brd 13.5dB Gain
• Manufacturer: TriQuint

Specifications of AH101-PCB

• Minimum Frequency: 50 MHz
• Minimum Operating Temperature: - 40 C
• Supply Voltage (min): 9 V
• Product: RF Modules
• Maximum Frequency: 900 MHz
• Supply Voltage (max): 11 V
• Supply Current: 200 mA
• Maximum Operating Temperature: + 85 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 1067251

AH101
Medium Power, High Linearity Amplifier
TriQuint Semiconductor, Inc • Phone [phone] • FAX: [phone] • e-mail: [e-mail] • Web site: www.TriQuint.com
This package is lead-free/Green/RoHS-compliant. It is compatible with both lead-free (maximum 260 °C reflow temperature) and leaded
AH101-G (Green / Lead-free SOT-89 Package) Mechanical Information
XXXX-X
101G
(maximum 245 °C reflow temperature) soldering processes. The plating material on the leads is NiPdAu.
Outline Drawing
Land Pattern
The AH101-G will be marked with an
“101G” designator.
code (“XXXX-X”) is also marked below the
part designator on the top surface of the
package. The obsolete tin-lead package is
marked
followed by an alphanumeric lot code.
Tape and reel specifications for this part are
located on the website in the “Application
Notes” section.
ESD Rating: Class 1C
Value:
Test:
Standard:
ESD Rating: Class IV
Value:
Test:
Standard:
MSL Rating: Level 3 at +260 °C convection reflow
Standard:
1. Ground / thermal vias are critical for the proper
2. Add as much copper as possible to inner and outer
3. Mounting screws can be added near the part to fasten
4. Do not put solder mask on the backside of the PC board
5. RF trace width depends upon the PC board material
6. Use 1 oz. Copper minimum.
7. All dimensions are in millimeters (inches). Angles are
Mounting Config. Notes
performance of this device. Vias should use a .35mm
(#80 / .0135”) diameter drill and have a final plated
thru diameter of .25 mm (.010”).
layers near the part to ensure optimal thermal
performance.
the board to a heatsink.
thermal via region contacts the heatsink.
in the region where the board contacts the heatsink.
and construction.
in degrees.
MSL / ESD Rating
Product Marking
with
Passes ≥ 1000V min.
Human Body Model (HBM)
JEDEC Standard JESD22-A114
Passes ≥ 1000V min.
Charged Device Model (CDM)
JEDEC Standard JESD22-C101
JEDEC Standard J-STD-020
an
“AH101”
An alphanumeric lot
Ensure that the ground /
designator
May 2009