AVR-H128-C Olimex Ltd., AVR-H128-C Datasheet - Page 2

• Manufacturer Part Number: AVR-H128-C
• Description: MCU, MPU & DSP Development Tools HDR BRD FOR ATMEGA128
• Manufacturer: Olimex Ltd.

Specifications of AVR-H128-C

• Processor To Be Evaluated: AT90CAN128
• Data Bus Width: 8 bit
• Interface Type: ICSP, JTAG
• Dimensions: 47 mm x 47 mm
• Operating Supply Voltage: 5 V
• Silicon Manufacturer: Atmel
• Core Architecture: AVR
• Silicon Core Number: ATmega128
• Kit Contents: Board
• Features: Serial Port ICSP Programmer, 6MHz Quartz Oscillator
• Rohs Compliant: Yes
• Tool Type: Development Board
• Processor Series: ATmega128
• Cpu Core: AVR 8
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 1776312 52R3435

INTRODUCTION
BOARD FEATURES
ELECTROSTATIC WARNING
BOARD USE REQUIREMENTS
AVR-H128 is inexpensive way to develop and prototype circuits with ATMEGA128
microcontroller without need to deal with SMD soldering. All microcontroller pins
are available on extension header with 0.1" and power supply, oscillators, ICSP,
JTAG are wired, so all you need to do is to connect your additional components to
the AVR ports, as the step is 0.1" these headers perfectly fit the prototype sea of pad
boards with 0.1" step.
–
–
–
–
–
–
–
–
–
–
–
The AVR-H128 board is shipped in protective anti-static packaging. The board must
not be subject to high electrostatic potentials. General practice for working with
static sensitive devices should be applied when working with this board.
Cables: The cable you will need depends on the programmer/debugger you use. If
you use AVR-JTAG or AVR-PG1 you will need RS232, if you use AVR-USB-JTAG
or AVR-ISP500/TINY/ISO you will need 1.8 m A-B USB cable, if you use AVR-
PG2, you will need LPT cable.
Hardware: One of OLIMEX Programmers/Debuggers – AVR-JTAG,
JTAG, AVR-ISP500, AVR-ISP500-TINY, AVR-ISP500-ISO, AVR-PG1, AVR-PG2.
Software: AVR C compiler.
ATMega128-16AU microcontroller with 128 KB Flash, 4KB RAM, 4 KB
EEPROM
ICSP 5x2 pin connector for in-circuit programming with AVR-PG1 or AVR-PG2
JTAG 5x2 pin connector for in-circuit debugging with AVR-JTAG or AVR-
JTAG-USB
16MHz scillator circuit
32768 Hz oscillator circuit
Reset IC ZM33064
+5V voltage regulator LM78L05
power supply filtering capacitors
extension pin headers for each uC pin
FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
dimensions 47x47 mm (1.85x1.85")
AVR-USB-