USB-COM422-PLUS1 FTDI, USB-COM422-PLUS1 Datasheet - Page 2

• Manufacturer Part Number: USB-COM422-PLUS1
• Description: Interface Modules & Development Tools USB to RS422 Convrtr Assembly 1 DB9 Port
• Manufacturer: FTDI

Specifications of USB-COM422-PLUS1

• Interface Type: USB, RS-422
• Data Bus Width: Serial
• Operating Supply Voltage: 5 V
• Product: Interface Modules
• For Use With/related Products: FT232R
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: USB-COM422-PLUS-1

Document Reference No.: FT_000131
USB-COM422-PLUS1 Datasheet
Version 1.1
Clearance No.: FTDI# 94
1
Introduction
1.1
Functional Description
The USB-COM-Plus modules are a family of communication devices. This model, USB-COM422-Plus1,
provides a simple method of adapting legacy serial devices with RS422 interfaces to modern USB ports.
This is accomplished by incorporating the industry standard FTDI FT232R USB-Serial bridge chip.
The integrated electronics of the USB-COM422-PLUS1 utilise the FTDI FT232R and includes RS422 level
shifters plus TXD/RXD LEDs to provide a visual indication of data traffic through the module.
Figure 1.1 USB-COM422-Plus1
The module uses a standard USB-B device connector for connection to an upstream host or hub port.
RS422-level signals, including modem handshake signals, are available on an industry-standard DE-9P
connector. The maximum RS422-level data rate is 3Mbps.
The USB-COM422-Plus1 module requires USB device drivers, available free from www.ftdichip.com, which
are used to make the USB-COM422-Plus1 appear as a Virtual COM Port (VCP). This allows existing serial
communications software, such as HyperTerminal, to exchange data through the USB-COM422-Plus1 to a
legacy RS422 peripheral device.
Copyright © 2010 Future Technology Devices International Limited
1